DDB Series Multi-Point Oil Mist Pump - JNB-10S

DDB Series Multi-point Dry Oil Pumps (10MPa)

I. Overview

The DDB series multi-point dry oil pump is suitable for multi-line dry oil centralized lubrication systems with low lubrication frequency, no more than 50 lubrication points, and nominal pressure of 10MPa. It is a device that supplies lubricating grease directly or through a single-line strip-type oil feeder to various lubrication points, particularly suitable for small single-machine equipment such as crushers, forging presses, dock cranes, and printing machines.

II. Technical Specifications

Section 3: Dimensions

DDB-10 Multi-point Dry Oil Pump DDB-18, DDB-36 Multi-point Dry Oil Pumps

Section 4: Model Marking Instructions

V. Instructions for Use

1. The multi-point oil pump series should be installed in an environment with suitable temperatures, minimal dust, and ease of refueling, adjustment, inspection, and maintenance.

2. Before using the DDB series multi-point oil pump, add HL-20 gear oil to the primary reducer until it reaches the level marked by the oil gauge.

3. Refueling the oil reservoir of the dry oil pump must be done using an SJB-D60 manual oil pump or a DJB-200 electric oil pump, adding oil through the reservoir's filling port. Note that it is strictly prohibited to start the motor when there is no lubricant in the reservoir.

4. Wire the motor according to the direction indicated on the storage drum, and do not reverse the direction.

5. The fuel filler neck filter must have a precision of no less than 0.2mm and should be cleaned regularly.
6. Dry oil pumps should be kept clean at all times, and it is strictly prohibited to remove the cover to replenish oil to prevent dirt from entering the pump, which may affect its normal operation.