DDB Series Multi-point Grease Pump - DDB-10

DDB Series Multi-point Grease Pump (10 MPa)

I. Overview

The DDB series multi-point dry oil pumps are suitable for multi-line dry oil centralized lubrication systems with low lubrication frequency, no more than 50 lubrication points, and nominal pressure of 10MPa. They supply lubricating grease directly or through a single-line strip oil feeder to various lubrication points, particularly suitable for small single-machine equipment such as crushers, forging machines, wharf cranes, and printing machines.

II. Technical Specifications

Section 3: Dimensions

DDB-10 Multi-Point Dry Oil Pump DDB-18, DDB-36 Multi-Point Dry Oil Pumps

Section 4: Model Marking Instructions

V. Instructions for Use

1. The multi-point oil pump series should be installed in environments with suitable ambient temperatures, minimal dust, and ease of replenishing oil, adjusting, inspecting, and maintaining.

2. Before using the DDB series multi-point oil pump, first add HL-20 gear oil to the primary reducer to the level indicated by the oil gauge.

3. Refueling the oil reservoir of the dry oil pump must be done using an SJB-D60 manual oil pump or a DJB-200 electric oil pump, by adding oil through the reservoir's filling port. Note that the motor should not be operated if there is no lubricant in the reservoir.

4. Wire the motor according to the rotation direction indicator on the storage barrel wall, do not reverse.

5. The fuel filler neck filter screen should have a minimum precision of 0.2mm and should be cleaned regularly.
6. Keep the oil pump clean at all times. Strictly prohibit removing the cover to replenish lubricant to prevent debris from entering the pump body, which may affect normal operation.