News Center Co., Ltd._Jiangsu Gote Electrical Control Technology Co., Ltd._Zhongshang 114 Industry Resources Network

Calculation of Capacitance after Full-Wave Rectification

After full-wave rectification, the signal requires a large capacitor to reduce ripple. How should the value of this capacitor be calculated?In the calculation of capacitors in capacitor filter circuits, this concept was introduced in college textbooks from the 1960s. In recent years, the use of a...

Why Does Voltage Rise After Passing Through a Rectifier Bridge?

Standard multimeters can only measure AC voltage at 50Hz and the average DC voltage. Directly measuring the average voltage using a standard multimeter across a rectifier bridge results in a higher reading due to the pulsating components. Adding a load pulls down the excess pulsating components. ...

Questions Regarding Bridge Rectifier Filtering

On-site Conditions:An AC26V power supply for the control section was transformed using a transformer and then rectified through a bridge rectifier (without filtering). During operation, it was discovered that some proximity switches were not functioning properly (the relay was not engaging well)....

What are the application fields of power regulators?

Power regulators are now generally triggered by digital circuits to control silicon-controlled rectifiers for voltage and power regulation. Voltage regulation uses phase-shifting control, while power regulation comes in two methods: fixed-cycle and variable-cycle. Below is a detailed introduction...

Bi-pressure Rectification Circuit

In applications requiring high voltage and low current, a voltage-doubling rectifier circuit is often employed. Voltage-doubling rectification can convert a lower AC voltage into a higher DC voltage using rectifier diodes and capacitors with lower voltage ratings. Voltage-doubling rectifier circu...

What's happening when 220V voltage is input to the rectifier bridge and it outputs 280V?

220V is the RMS value of alternating current, while the peak value of AC with an RMS value of 220V is approximately 311V. Generally, rectifier bridge output circuits are equipped with a filtering circuit composed of capacitors and resistors. During filtering, the capacitor smooths out the rectifi...

Gotee Electrical: Powering Traditional Industries with Quality and Technology

Amid the accelerated development of global industrial automation, traditional manufacturing industries are at a crucial stage of transformation and upgrading. Jiangsu Gote Electrical Control Technology Co., Ltd., with its superior quality and strong technical capabilities, offers reliable power e...