Common Malfunctions of Mine Powder and Slag Pellet Press Machines

As a forming machine, the mineral powder slag briquetting press may encounter various common malfunctions of different specifications after a period of use, which greatly impairs its efficiency. Moreover, if regular maintenance is not performed, it leads to continuous increases in equipment investment. The main reason is the lack of proper maintenance. Therefore, here are some daily maintenance tips for the mineral powder slag briquetting press for your reference.

Section 1: Daily Maintenance of Mineral Powder and Slag Pellet Press Machines

Routine inspections and cleaning

(1) Inspect and tighten the foundation bolts of the theoretical foundation; open the reducer cover to check the gear engagement and wear condition.

(2) The hydraulic cylinder of the pellet press should be shut down for inspection. If there are fundamental causes such as temperature fluctuations or oil leakage leading to significant pressure changes, new oil should be introduced or the machine should be operated back to the adjustment phase to achieve the required pressure transition. If oil leakage in the oil pressure system is detected during operation, the machine should be immediately shut down, repaired, and then restarted.

Ensure timely inspections of the mineral powder slag pellet machine's wiring to maintain production manufacturing.

(4) Pay close attention to handling the dust from the mineral powder slag ball press, ensuring dust removal throughout the disassembly and assembly process. Be meticulous and careful when moving the equipment to different positions. (5) In case of excessive dust, it should be dealt with promptly.

(6) Conduct a long-term shutdown and clear out any remaining raw materials from all departments.

(7) The transmission chain of the mineral powder slag ball press must be cleaned once a month.

2. Regularly replace and replenish a variety of hydraulic oils

(1) Regularly maintain engine oil; apply lubrication to the gearbox twice per shift.

(2) The ball press motor's lubricating oil should be changed every three months to ensure the normal operation of the equipment.

(3) Regularly inspect the lubricant of the transmission system; if insufficient lubricant is found, it must be replenished promptly.

(4) The roller bearings on the mineral powder and slag ball presses should be lubricated with grease annually in one go.

(5) Perform monthly lubrication oil injections, and completely flush out after 6 months.

3. Regularly replace worn-out parts.

Section II: Common Maintenance and Care Issues for Mine Powder and Slag Pellet Press Machines

Inspect the internal triangular wear-resistant pads, rolling bearings, spiral parts, and nozzle areas of the overall body for wear issues and proceed with cleaning and replacing the mobile bearing lubricant.

(2) Open the reducer inspection cover to check the contact and wear conditions of the drive gears.

(3) Inspect and tighten the foundation bolts of the theoretical base for looseness.

(4) In case of significant changes in the hydraulic cylinder's working pressure, it is necessary to promptly introduce new oil.

(5) In the event of oil leakage in the automatic pressure control system during operation, the machine should be immediately shut down and restarted after the oil leakage is repaired.

(6) After cleaning the parts, they must be lubricated before assembly.

(7) Assembly of parts must first check for wear conditions, and worn parts must be replaced regularly.