Have you heard about the accessories for air cannons?

Have you heard about the auxiliary equipment for air cannons? It's impossible to achieve the unclogging function of an air cannon with just one alone; therefore, we also have other auxiliary equipment. These include nozzles, air compressors, solenoid valves, and more. 1. Nozzles Installation is somewhat special. During operation, the air flow does not directly sweep the material but instead sweeps the support points of the material, making the effect very ideal. 2. Material of the release bearing: Features: High smoothness of the wall surface and low friction coefficient, creating conditions for the high-speed movement of the piston. Piston material: Made mainly of polyethylene polymer, with an outer steel sleeve added for protection. Features: The piston will not swell and jam at high temperatures or leak due to shrinkage at low temperatures, thus the equipment can operate normally under large temperature differences. 3. Solenoid Valve The new generation of air cannon products uses the cannon body for intake, switching to a two-position two-way solenoid valve. This eliminates the need for an oil-mist eliminator and water filter, thereby avoiding a series of issues and disadvantages associated with their installation, increasing the lifespan of the solenoid valve. It has been used by units in the power, coal coking, and cement industries with good performance. Maintenance and repair costs are reduced by 90% compared to older models from other manufacturers. Using a two-position three-way solenoid valve requires higher environmental conditions and gas purity, necessitating the addition of filtering equipment to ensure the purity of the air cannon's gas source. This, in comparison to the two-position two-way solenoid valve, increases the number of components, leading to higher costs, increased failure rates, and higher maintenance rates.