详情描述

Polyurethane Face Paint


Composition   This product is a two-component self-curing paint composed of a resin base, along with pigments, additives, fillers, solvents, and other ingredients.

Performance   Polyurethane topcoat boasts excellent weather resistance, resistance to gasoline and hydrocarbon solvents, superior mechanical properties, adjustable luster, and a full, aesthetically pleasing finish.

Usage   Polyurethane topcoat is suitable for outdoor anti-corrosion coatings on bridges, oil tanks, containers, steel structures, and chemical pipelines.


Product Specifications

Film Color: Customer-Specified

Mixed Ratio: Base Paint for Flat Products: Hardener = 20:4

Highlight Product Main Paint: Hardener Ratio = 20:5


Technical Specifications

Complementary system


The new hydroxypropyl weather-resistant and anticorrosive paint can be paired with various coatings for application in various industrial environments.

· Carbon steel, cast iron: Epoxy zinc-rich primer, epoxy iron red primer, inorganic zinc-rich primer + epoxy iron oxide intermediate coating + new hydroxypropyl weather-resistant anticorrosive finish.

Galvanized steel, stainless steel, aluminum alloy: HY-05 multi-functional primer + epoxy iron oxide intermediate coating + new hydroxypropyl weather-resistant anti-corrosion topcoat.

· Fiberglass: Light gray epoxy primer + new hydroxypropyl weather-resistant coating.

· Plastic (e.g., ABS): Ready for use after surface treatment.

· Concrete: Epoxy primer + Epoxy iron oxide intermediate coating + new hydroxypropyl weather-resistant anti-corrosion finish paint.

Construction Method

Material Pre-treatment

The coated metal surface must be thoroughly cleaned of oil, scale, rust, and old coatings. Shot blasting or sandblasting methods can be used to achieve the Swedish rust removal standard Sa2.5, with a roughness of 30-70μm. Alternatively, manual rust removal can be employed to meet the Swedish standard St3, with a roughness of 30-70μm.

2. Mixed

Priced by weight ratio (as indicated on the product packaging)

While mixing, slowly pour the hardener into the main agent while continuously stirring to ensure thorough and even mixing.

After the mixed paint has matured (at 23±2℃) for 20 minutes, filter it through a 80-100 mesh sieve and pour it into another container for later use.

Mixed paint has a shelf life of 2-3 hours, please schedule usage according to the progress of the application.

3. Construction Conditions

The coating operation should be carried out as soon as possible after the substrate treatment, generally not exceeding 6 hours. If overcoating on the primer or intermediate coat, construction should be recommended based on the paint curing time. The substrate surface temperature and ambient temperature should generally not be lower than 10°C, with the surface temperature at least 5°C higher than the dew point, and the relative air humidity should not exceed 75%.

4. Coating Methods

This paint can be applied using brush painting, airless spraying, and air-assisted spraying methods.

5. Dilute

Generally, paint requires a compatible thinner to adjust viscosity and clean tools. For spraying, a recommended ratio is 10-20%, while for roller and brush application, the ratio should be 5-8%.

6. Coating Spacing

One-component paint can be coated after drying. For two-component paint, it is recommended to wait the following time intervals before coating: