- AllProduct Category
-
Epoxy Corrosion-Resistant Paint
汽车漆
醇酸涂料
环氧涂料
聚氨酯涂料
丙烯酸涂料
High-Temperature Paint
详情描述
High-temperature resistant silicone coating, withstanding up to 400°C
Group Please provide the Chinese content to be translated. BySiliconeResin, active anti-rust pigments, penetrants, hardeners, and additives, etc.。
Sex Certainly This productBoasts high-temperature resistance along with excellent weather and corrosion resistance. After high-temperature treatment, the organic silicon and inorganic silicate are bonded together, thereby protecting the base material. This product improves the poor corrosion resistance of previous organic silicon coatings under normal and high temperatures, as well as during water washing and alternating hot and cold conditions.
Please provide the Chinese content to be translated. Path Commonly used for temperatures ranging400Steel and cement surfaces below ℃ serve decorative, protective, and anti-corrosion and rust functions.
Product Specifications
Temperature Range | Film color | Coating Type | Mixture Ratio |
400℃ | Iron red, gray | Primer | Single-component, two-component |
400℃ | Black, white, gray, aluminum powder, etc. | Face Paint | Single-component, two-component |
Technical Specifications
Project | Index |
Color | Primer: Grey, Iron Red Surfaces Paint: Black, white, gray aluminum powder colors |
Gloss | Undercoat: Matte Flat or Semi-Gloss Paint |
Viscosity | 25-60s（25±1°C, coated-4） |
Drying Time （23±2℃） | Primer: Surface dry≤1hNo Chinese content provided.24h Topcoat: Surface Dry≤2h, Action-oriented ≤24h |
Flexibility | ≤2mm |
Adhesion | ≤2Grade |
Impact resistance | ≥40kg·cm |
Thermal resistance400℃，2h） | Non-bubble, non-crack |
Shelf Life | 25° C, Store away from light6-12month |
Construction Method
Material Pre-treatment
Prior to painting, the substrate surface should be cleaned of oil, rust, foreign matter, etc. Sandblasting toSa2 grade, remove residual paint, rust, and oxidation scales.
2. Mixed (for two-component paints)
Priced by weight ratio (as indicated on the product packaging)
While mixing, slowly pour the hardener while continuously stirring the main agent to ensure thorough and even mixing.
Pre-mixed Paint MaturationAfter 20 minutes, filter through a 60-80 mesh sieve and pour into another container for later use.
Mixed paint shelf life3 hours, please use according to the construction progress.
3. Baking (suitable for one-component paint)
Product Name | Baking Temperature | Insulation duration |
High-temperature resistant silicone coating, withstanding up to 400℃ | 220℃ | 30min |
4. Construction Conditions
Spraying operations should be carried out as soon as possible after the substrate treatment, generally not exceeding8 hours. The surface temperature of the base material and the ambient temperature should generally not be below 10°C, with the surface temperature at least 3°C higher than the dew point, and the relative humidity of the air should not exceed 85%.
5. Coating Methods
This paint can be applied using brush coating, airless spraying, and air-assisted spraying methods.
6. Dilute
Generally, paints require a compatible thinner to adjust viscosity and clean tools.
7. Coating Interval
One-component paint can be coated after drying. For two-component paint, it is recommended to wait the following time intervals before coating:
Substrate Temperature | 5℃ | 20℃ | 30℃ |
Short | 48h | 24h | 12h |
Long | Unrestricted | ||
