Rolling bearings use rolling elements to separate moving parts and reduce rotational friction. They are beneficial for supporting radial and axial loads.

We offer a variety of rolling bearings, including ball bearings, spherical bearings, cylindrical bearings, needle roller bearings, cone bearings, spindle bearings, and cylindrical bearings. Additionally, these can be categorized as open, shielded, or sealed.
Sealed bearings are lubricated with oil or grease during manufacturing. Open and shielded bearings must be lubricated during installation and re-lubricated throughout their service life.
For shielded bearings, the shielding helps to eliminate environmental debris from entering the bearing. This protection aids in extending the service life and maintaining the bearing at the expected operating speed.
2RS is a sealed bearing featuring two rubber seals, one on each side of the bearing. (Please note that if your application requires only one seal, it can be removed from one side.)
The 60042RS is widely used in industrial machinery, electric tools, and mechanical equipment. It is also utilized in various forms of transportation, including cars, motorcycles, and snowmobiles.
The 6004 2RS with the marking 20 x 42 x 12 signifies an inner diameter of 20 mm, an outer diameter of 42 mm, and a total width of 12 mm.
The bearing features a deep groove geometry to support high-speed operation under radial and axial loads. The rubber sealing prevents contaminants and lubricating oil from entering. Moreover, due to its lubrication and sealing during the manufacturing process, no additional lubricant is required.