Quickmix Grout Material Manufacturer

Ningbo BoFang Wind Power Technology Co., Ltd. was established on February 15, 2016. The legal representative is Wang Shulan.
Features of Wind Turbine Foundation Grouting Material
Early strength, high strength, high durability, excellent resistance to chloride ion penetration, and frost resistance.
2. High flow rate, pumpable, non-dripping, easy to install.
3. Composite expansion with dual effect, no shrinkage.
4. Free from rust on rebar.

Application Method of Wind Power Grouting Material
1. Base Surface: Roughen concrete surface, blow out dust or sand from bolt holes, and clean metal surfaces of grease or rust. Pre-soak the concrete base surface with clean water, ensuring no free water is present during grouting.
2. Preferably use mechanical mixing. Begin by adding 2/3 of the total water and mix for 3 minutes, then add the remaining 1/3 water and mix until a smooth and even consistency is achieved.
3. Water-to-material ratio: 12.5%
4. Grouting for wind turbine foundations: Begin grouting from one side and continue until it overflows to the other side; do not grout from both opposite sides simultaneously. Once grouting starts, it must be conducted continuously, and smoldering may shorten the grouting time.
5. After grouting, immediate watering and maintenance should be performed, and cover with wet straw bags or plastic film. The maintenance period should not be less than 3 days.

Wind Turbine Grouting Material, eliminates the moisture and porosity formed due to "grouting bleed" beneath coarse aggregates and under level reinforcement, reducing the generation and development of internal micro-cracks, enhancing the bond strength between grouting material and reinforcement bars, improving the compaction of the grouting material, and enhancing its crack resistance. Control the delivery spacing. After the grouting material arrives at the construction site, it should first be unloaded and stored in a dry, standard storage facility for slurry storage, to prevent moisture absorption and clumping, which can cause significant settlement or flow damage. During concrete pouring, the formwork, reinforcement, and secondary grouting material base should be moistened and cooled, and also effectively segmented to minimize the interval between new and old concrete pouring. Grouting work should be prevented from being carried out under direct sunlight. Grouting Material Technical Specifications: early strength, high strength, high fluidity (self-flowing), no shrinkage, oil resistance parameters; early grouting strength and high strength: one grade reaches over 60MPa, and the equipment can be put into operation after installation.

Wind Turbine Grouting Material Packaging and Storage
1. Wind power grouting material is packaged in pearl film composite woven bags, 50kg per bag.
2. Store in a cool, dry, and well-ventilated warehouse; avoid exposure to rain.
3. Valid storage period of 6 months from the date of manufacture.
We offer quality products and a dedicated team. Our company is rapidly growing, and we provide our clients with excellent products, reliable technical support, and comprehensive services.