Forging release agents are suitable for aluminum/copper/iron, stainless steel hot forging die forming, offering excellent lubrication and release properties. They enhance the quality of forged parts, provide excellent heat insulation and cooling for molds, and can extend mold life by approximately two to four times based on different forging processes. They do not burn, corrode, or emit harmful gases at high temperatures, eliminating environmental pollution and improving working conditions. They have strong suspension, form a uniform film, and exhibit high adhesion of the coating.

Key Advantages:

1. Excellent lubricity
2. Fast heat transfer
3. Excellent demolding properties
4. Ultra-fine particles

Usage Instructions:

Please ensure thorough mixing before use to prevent the release agent from settling unevenly, which may affect its demolding performance due to altered properties.
2. After shaking the product well, pour it into the solvent. Initially, add a small amount of water (about 1-2 times the product volume) and stir until well mixed. Then, add a large quantity of water to dilute. Depending on the intended use, dilute generally in a ratio of 8-30 times (reduce the dilution ratio when applying by brush). Up to 40 times dilution (the dilution ratio should be determined based on the mold design and the user's experience).
3. Please clean and heat the iron mold surface to above 100℃ before use.
4. Apply evenly with a spray. Please reduce the dilution ratio when brushing.

Note:

Keep sealed when not in use. Storage at room temperature (10-28 degrees Celsius) is recommended.
2. After use, clean the spray gun with clean water.
3. The sealed storage period is 10 months.

Packaging

20 lbs/bucket 25 lbs/bucket