Description

It includes both with and without graphite. Particle sizes range from 1.0 to 1.5mm, 1.5 to 2.0mm, and 2.0 to 3.0mm. It melts and rapidly expands within the injection sleeve and at the tip, forming an excellent lubricating film inside the sleeve due to its capillary effect. It's easy to use and does not require the traditional spray systems with drip-painting pumps used for oil-based or water-based products.

Appearance: White, yellow, transparent (without graphite), granular.

Application Range: Molding bushings with diameter ranging from 50 to 120mm; Black granules: Containing graphite, spherical beads.
Density at 20℃: 0.5-0.7 cm³.
Application Range: Injection sleeves with diameters ranging from 50 to 160mm.

【Instructions for Use】

Add granules to the pouring chamber using a particle emitter.
Usage is tailored to different punch diameters
60mm 0.4-0.5g
80mm 0.6-0.8g
100mm 1.0-1.3g
140mm 1.7-2.5g
150mm 2.2-4.0g
The determination of usage depends on the casting weight and requires empirical trial.

【Advantages】

No contamination produced by general oily lubricants.
2. Reduce the occurrence rate of casting pores.
3. Enhances the service life of the plunger tube and reduces the adverse effects caused by friction.
4. The lifespan of the punches used in die-casting is generally doubled compared to those lubricated with pure oil.
5. Increase the jet speed.
6. Complete consumption of particles during casting, with no contamination from lubricating oil.
7. The die-casting parts have no oil stains on the surface, presenting a clean and glossy finish.
8. When the injection gates, runners, and slabs are recycled for reuse, they are free of oil stains, smoke, and air pollution.
9. No wastewater treatment required, no need for water cooling systems or cleaning injection nozzles.
10. Highly economical; saves costs.
11. Enhance process safety.