1. During the installation of safety netting for construction, each rope must be tied securely to the bracket. The edges of the safety net should be tightly attached to the brackets. When tying knots, ensure they are as tight as possible, easy to untie when necessary, and maintain the principle of not coming loose under working stress. For safety nets with reinforcing ropes, these ropes should also be connected to the brackets during installation.

2. The net surface should be perpendicular to the horizontal plane and no more than 10cm from the edge seam of the working area.

3. The safety mesh screen in construction should not be stretched too tightly. The distance between the two layers of flat mesh should not exceed 10 meters, and the small gap between the flat mesh and the surface of the object below should be no less than 3 meters.

After the installation of the construction safety net is completed, it must pass an inspector's check and approval before it can be used.

5. Regularly conduct periodic inspections of safety nets in use, and promptly clear away any fallen objects.

For more information, please inquire.19863089818