Release Agent

Appearance: Milk-white emulsion

2. pH: Neutral (7-8)

3. Corrosiveness: Non-corrosive

4. Dosage: Please contact the engineer for specific dosage; use as instructed by the engineer.

II. Usage Instructions:

Ensure the mold is clean before applying the release agent; no rust or concrete residue is allowed.

2. Apply the release agent evenly over the mold, or use a spray method, directly spraying it onto the mold. Once the release agent is dry, concrete can be poured.

3. Templates treated with release agents should not fear rain once dried, but for quality assurance, it is recommended to reapply concrete release agent to bridges and large structures after rain exposure.

III. Cautionary Notes:

Before use, stir the release agent thoroughly.

Apply mold release agent evenly, do not miss any spots.

3. The demolding agent should not be used during rainy weather.

4. This demolding agent should be stored in a cool place, away from direct sunlight.

IV. Packaging and Storage:

Packed in 25kg/bag, 50kg/bag, and 200kg/bag, or custom-packed as per customer's request.

V. Product Advantages:

This product is a water-based emulsion, with a neutral pH, it does not react with concrete or aluminum molds, and is harmless to humans, making it a highly

High-efficiency and eco-friendly release agent. Once applied to the mold, it forms a transparent protective layer on the aluminum mold within 15-30 minutes, preventing concrete from sticking to the mold. The release agent does not leave residues on the concrete wall, ensuring no adverse effects on subsequent projects. It saves labor, protects the aluminum mold, and extends its service life.