What to Consider for the Flooring of an Electromagnetic Shielding Room?

After the installation of an electromagnetic shielding room, does the floor need to be treated? There are many things to consider when dealing with the floor of an electromagnetic shielding room. It's evident that an electromagnetic shielding room is something akin to a shielding box. This time, the electromagnetic shielding room manufacturer, Helin Shielding, informs you about how to install the floor of a shielding room and what to be aware of.

Firstly, when designing the shell of the electromagnetic shielding room, we don't need to consider other factors. We just need to consider the gap between the area where the electromagnetic shielding room floor will be laid and the shell's frame and the bottom plate of the electromagnetic shielding room shell. This should be determined based on the actual situation.

2. Next, when laying the electromagnetic shielding room floor, we must ensure to leave some space for cable placement, and then consider its appearance based on the actual situation.

Lastly, after installing the electromagnetic shielding floor of the room, we must consider that the electrical design requires the distribution of high-voltage and low-voltage trunk lines within the vertical shaft to the horizontal power control cabinets and signal jumper cabinet, respectively, and then the conduits are buried vertically downwards until they reach the ground.

What should we pay attention to when installing an electromagnetic shielding room? You can find the answers on our website, or you can call us for consultation; we will respond promptly and provide you with the necessary explanations.