Accelerated Impact Test Stand

The impulse voltage generator is primarily used for testing the insulation performance of electrical equipment and other samples with full-wave lightning impulse voltages, chopped lightning impulse voltages, and operating impulse voltages.100～10000kVSeries of various capacity complete sets of impulse voltage (current) testing equipment. The impulse testing device is mainly composed of: generator body, cutting wave, voltage divider, four-component control console (the console is divided into microprocessor type and ordinary type), digital waveform recording system, etc.

Overview

The impulse voltage generator is primarily used for testing the impulse voltages of full wave lightning, chopped wave lightning, and operating wave impulse voltages on electrical equipment and other test samples, to verify their insulation performance.

100～10000kVSeries of complete sets of impulse voltage (current) test devices in various capacities. Also, we offer a range of waveform series complete sets of impulse voltage (current) generators. The impulse test device is mainly composed of: generator body, cutoff, voltage divider, four-component control console (the console is divided into microprocessor type and ordinary type), digital waveform recording system, etc.

Features

1The coil inductance is low, and resistance filtering measures are adopted, enabling the generation of standard impulse waves under high capacitance load conditions with a strong load capacity.;

2High voltage utilization coefficient; lightning waves and operating waves are not less than, respectively.85%No content provided for translation.80%；

3Wave adjustment is convenient, operation is simple, synchronization performance is good, and actions are reliable.

4The product employs a constant current charging automatic control technology, featuring high automation and strong anti-interference capability.

A power supply device that mimics lightning and overvoltage surges. Primarily used in insulation surge withstand and dielectric breakdown, discharge, and other tests.

The standard waveforms for impulse voltages used in insulation tests are in accordance with the International Standard and National Standard for "High Voltage Test Technology":

Thunderbolt SurgeT1/T2=1.2/50μs

Operation ShockwaveTcr/T2=250/2500μs