Underground Pipeline Detector

Pipeline management and maintenance, urban planning and construction, and power supply departments' pipeline inspections are essential for pipeline maintenance units.

(1) Versatile

Transmitter Function: Equipped with three signal application modes—inductive, direct, and clamp—suitable for various on-site requirements.

2. Receiver Function: Used for measuring the location, direction, burial depth, and current of underground cables.

3. Left and right positioning arrows indicate the target pipeline location, with quick positioning.No Chinese content provided for translation.. Correct; Forward and backward arrowsThe dB value indicates the location and size of the coating's damage point.

4. Backlit feature for night-time emergency operations.

5. Burial Cable Fault PointsPlease provide the Chinese content you would like translated.. .Positioning.

6. Current Measurement: Measures the current applied by the transmitter to the pipeline under test.

7. Multimeter Functions: Measures output voltage, line voltage, line current, impedance, and power. Tests the continuity and insulation quality of cables before and after cable fault detection.

8. External Inductive Clamp: Ideal for situations where direct signal application is not possible during cable detection.

High positioning accuracy:

Multiple measurement modes for pipeline location(Valley mode, Peak mode, Wide Peak mode, Peak Arrow mode) can be mutually verified to ensure pipeline location accuracy.No Chinese content provided. Please provide the text to be translated.. ConfirmPlease provide the Chinese content to be translated.

1、Extreme.Great Value MethodThe horizontal component or gradient change can be measured using peak mode, wide peak mode, and peak arrow mode, and the location can be determined based on the position of the large value.

2、Extreme.Micro-value MethodUtilizing the valley mode, the system locates by measuring changes in the vertical component and identifying the position of its lowest value.

(3) Multiple Depth Measurement Methods

Our company offers a variety of depth measurement methods for selection., and can be mutually verified.

Dual-level Coil Direct Reading Method

2. 80% and 50% single-level coil methods

3. The 45-degree method.

(4) Strong anti-interference capability

Multiple observation parameters: capable of measuring both horizontal and vertical components as well as horizontal gradients.

2. High Emission Power: The transmitter outputs up to 10W with continuous adjustable power, allowing for any desired selection based on need.

3. High work frequency:

Transmitter Frequency:128Hz、512Hz、1KHz、2KHz、8KHz、33KHz、65KHz、83KHz。

Receiver Frequency: Radio,50Hz、100Hz、512Hz、1KHz、2KHz、8KHz、33KHz、65KHz、83KHz。

In accordance with the characteristics of the target pipelineMaterial, structure, burial depth, length, etc., and select an appropriate working frequency based on the environment.

(Simplified Operation)

1. Intuitive: Utilizes graphical displays to continuously and in real-time show various parameters and signal strengths during the detection process.

2. Auto: During depth measurement, automatically switches to dual-level antenna mode and adjusts the receiver sensitivity to optimize the measurement signal. Upon completion of depth measurement, automatically returns to the previous working mode.

(6) Extended work hours, low cost of use

The transmitter is equipped with a high-capacity lithium battery pack.A single charge can power the field exploration equipment for a full workday, and it is reusable, significantly reducing the detection costs.

(7) Dual-purpose Transmitter for AC and DC

In normal circumstances, the instrument's internal battery pack is used to power the transmitter when its battery is fully charged. Should the transmitter's battery run low during operation but the detection task is not yet completed, a dedicated power adapter can be directly connected to ensure the instrument continues to function without the need to wait for a full charge.