High-Voltage Circuit Breaker Final Inspection Bench

One,Summary:  [No Chinese content provided, original text returned: "述"]

Circuit breakers should undergo磨合 before shipment.To remove burrs produced during the manufacturing process and for shape correction, ensuring the switches operate in optimal mechanical condition upon leaving the factory.In response to the needs of circuit breaker manufacturers, Shaanxi Yike Electric Technology Co., Ltd. has developed and producedGKM High PressureCircuit BreakerMachining TestSystem.

The GKM High-Voltage Circuit Breaker Test System is connected to a computer, utilizing the dedicated GKM磨合 software for parameter settings and wear testing management.Please provide the Chinese content to be translated.Please provide the Chinese content to be translated.Six circuit breakersProceedRiding TestAnd the six-way matching can be completely independent in parameter settings, sequence control, and matching tests.。The software interface is intuitive in its integration.Parameter SettingsSeamless and Quick Scheduling Control，Extreme.Please provide the Chinese content to be translated.No Chinese content provided.EnhanceWork Efficiency.

GKM High-Voltage Circuit Breaker Commissioning SystemOvercameTraditional Abrasion TesterUtilizing Time Relay for Wear-TestingCausedThe weakness of poor control capability, which easily leads to the burning of the opening and closing coil, has been effectively protected to ensure the integrity of the circuit breaker.GKM High-Voltage Switches are Underging Milling and TestingSystemSimple to operate, it's a circuit breaker.ManufacturerDesign and TestingIdeal tool for circuit breakers, even moreEssential testing equipment for factory inspections。

II. Main Features and Characteristics

1、Operational Functions: Performs single phase break, single phase close, phase separation, phase recombination, and reclosing operations according to pre-set parameters, as well as lifespan tests.

2、Alarm Feature: When the circuit breaker failsRefusedCombineDenyIn the event of splits, misalignments, or mismatches.WindowSoftwareVoice PromptReport error and shut down power to stop operation。

3、Protection Feature: When activated[Segment]GateUpon command, after an appropriate delay, automatic disconnection is initiated.Sectional circuit breaker, to prevent tripping due to circuit interruptionDeclineAction or auxiliary switch not properly converted to engageCoils remain energized for extended periods.

4. Each work station operates independently: GKMMoldingTest SystemThe feature of having an independent circuit breaker, which operates during磨合No Chinese content provided.When a circuit breaker experiences faults such as failure to separate, failure to close, incorrect separation, or incorrect closure,SystemAlert issued, operations halted.HoweverDoes not affect the normal operation of other workstations.

5、After the磨合设定次数 is completed, the software provides an informational prompt.System AutomaticCease operation commands, disconnect power.

6. Flexible Time Settings:Split, MergeZha (No translation provided as there is no Chinese content to translate.)IntervalCan be set individually.Determined Scope:0.1-25Second；Division and ConsolidationThe gate output time can be set.Scope Defined:0.1-25Second.

7. Flexible Power Input: Each work station's operating power can be independently configured for either AC or DC input.。

Section 3: Main Technical Parameters

Power: AC220V±15%; 50Hz；

2. Total Power Consumption: ≤50W

3. The internal contact point can withstand a current of 10A.

4. High Input Voltage: 240V

5. Humidity: ≤85% RH

6. Temperature: -10℃ to 50℃

7. Dimensions: 370mm×280mm×160mm；

8. Weight: 6kg