SF6 Micro-water Tester

Measurement Operation

At the start of the measurement, ensure all needle valves on the measuring pipeline are fully open. Subsequently, adjust the gas flow using the flow valve on the panel. Upon completion of the measurement, close the valves in reverse order.

First-time use and long-term storage

If the micro hygrometer has not been used for an extended period, some air may remain in the testing pipeline and gas chamber. During the first test, the high humidity component in this air may affect the testing speed, as the instrument needs to first expel this moisture.SF6Gases have reached saturation. However, from...The.No content provided for translation.At the beginning of this test, especially when conducting consecutive tests on multiple units.SF6During electrical equipment operations, this process is significantly expedited, usually requiring only3-5Minute.

Measuring in the Heat

When conducting measurements under high-temperature conditions, it is recommended to perform them during the cooler morning hours to ensure the accuracy of the results.

Product Features

Portable Design: The instrument is compact and lightweight, easy to carry and use, suitable for various on-site environments.

Rapid Measurement: The instrument can immediately enter the measurement state without any delay after being powered on, quickly providing the humidity value.

High Efficiency, Low Gas Consumption: During the measurement process, gas consumption is only2L（101.2kPaEconomical and eco-friendly.

Safety-Locking Connector: Utilizing high-quality German进口 self-locking connectors to ensure secure and reliable connections, with no risk of gas leakage.

High-Capacity Data Storage: The instrument is equipped with a large internal storage capacity, capable of storing many more.50Group test data for subsequent analysis and processing.

Clear Display: Equipped with a liquid crystal display, it can directly show dew point and moisture content.ppmKey information including environmental temperature, humidity, current time, date, and battery level.

Built-in Power Supply: Equipped with4AhRechargeable lithium-ion battery, capable of continuous operation for up to10Hours, meeting the needs for long-term on-site testing.