SF6 Gas Recovery Unit

Product Introduction

SF6Gases, as an insulating medium, are non-toxic, non-flammable, and possess excellent insulating properties. Their insulating strength far exceeds that of traditional insulating gases, and they also exhibit good arc-quenching capabilities, making them widely used inSF6Appliances. Due toSF6The high cost of gas, coupled with decomposition into toxic components under the influence of arc, electric spark, and corona discharge, poses a concern.SF6Appliances require the application of...SF6Gas Recovery. This device is designed for manufacturing and maintenance.SF6Appliance equipment: recycling and refuelingSF6A specialized equipment for gases.

Product Features

EDHCType Six，Fluorine，Please provide the Chinese content you would like translated into American English.，The sulfur gas recovery and filling device features comprehensive functions including recovery, filling, purification, vacuum extraction, storage, and bottling. The system is quite complete. The sequential operation or switching of these functions is primarily achieved through the control box and ball valves located on one side of the panel.

The basic working principle of the recycling unit is the cryogenic liquefaction method. During the recycling process, the unit utilizes the suction and compression capabilities of the compressor.SF6Electrical equipment under a certain pressureSF6Gas is inhaled into the compressor and compressed to a higher pressure. Simultaneously, the low evaporation temperature characteristic of the refrigerant is utilized to lower the higher temperature.SF6The gas is cooled to condensation temperature for liquefaction and storage. This process is continuously suctioned.SF6Compressors operate in series until reaching the final recovery pressure.

During charging and discharging, initially, the vacuum pump of this device is utilized.SF6Vacuum is drawn from electrical equipment (or cylinders) and connecting pipelines, then a pressure difference is directly utilized or a pressure difference is created by the suction of a compressor to store the device in its containment vessel.SF6Fill inSF6Electrical equipment is used until the required working pressure is achieved. When bottling is necessary, the characteristics of the refrigerant, as previously mentioned, are utilized simultaneously to液化SF6Directly fill into steel cylinders.

For further inquiries or purchase intentions regarding Wuhan Ede Electric Power Test Equipment Co., Ltd.'s products, please call the manufacturer's direct sales hotline:400-034-8088Their professional team will provide you with more detailed information and services.