Automated Liquid-Liquid Extraction Apparatus CH-CQ-6A Anionic Air Flow Oscillation Separator

Fully Automatic Liquid-Liquid Extraction Apparatus CH-CQ-6A Anionic Air Flow Oscillation Separation DeviceOperation Precautions (Summary):

Sample Preparation

• Samples must be fully dissolved or homogenized to prevent clogging of the pipelines.

• Maintain sample volume under 2/3 of the extraction bottle capacity to prevent overflow.

2. Solvent Selection

• Ensure the two-phase solvents are mutually immiscible.

• The solvent ratio is properly balanced, ensuring effective stratification and extraction efficiency.

3. Equipment Setup

• Set appropriate oscillation speed and time (avoid over-эмульгация).

• Adjust the settling time to ensure complete phase separation before proceeding with the separation.

4. Operational Safety

• Check pipeline tightness to prevent solvent leaks (especially organic volatile solvents).

• Operate under a fume hood or in a well-ventilated area, avoiding inhalation of harmful gases.

5. Maintenance and Cleaning

• Wash the pipeline and extraction bottle promptly after each use to prevent cross-contamination.

• Regularly inspect instrument gas and liquid lines to prevent blockages or aging.

6. Exception Handling

• In case of severe emulsification, add salt (NaCl) or use centrifugal demulsification.

• Equipment will be immediately shut down for investigation upon alarm (such as abnormal pressure).

Hint: Operation details may vary by model; refer to the device manual or manufacturer's instructions.

Fully Automatic Liquid-Liquid Extraction Apparatus CH-CQ-6A Anionic Air Flow Oscillation Separation DeviceKey Features:

1. 7-inch large LCD touch screen, one-touch operation system, display screen fixed at the front of the machine for easy operation by experimenters; allows for self-setting of various instrument parameters.

2. Supports the use of extraction bottles in various specifications; all gas valves are made of PTFE material.

3. 6-position operating system, capable of independently extracting 6 sets of samples; one-button extraction and oscillation, automatic settling and stratification, with individual control for each sample.

4. Extraction time, extraction rate, intermittent time, and extraction cycle can be independently set and adjusted, accompanied by a buzzer reminder feature.

5. Automatic extraction, degassing, collection, liquid discharge, and cleaning functions.

6. Equipped with a stainless steel telescopic waste liquid tank, suitable for various reagent needs. It features an automatic filtration system, eliminating the need for manual drainage.

7. Equipped with waste liquid activated carbon filtration and purification function, reducing environmental pollution.

8. The automatic cleaning feature utilizes a pressure-scattered wide-angle cleaning method, covering the entire inner wall of the separating funnel, ensuring more reliable cleaning results.

9. The unit features electric leakage protection, overvoltage and overcurrent protection devices, and is equipped with 6 independent voltage stabilization systems, enhancing the consistency of the machine's extraction efficiency.

10. Extraction power can be adjusted at will with the knob.

11. Offer brackets with different-sized extraction bottles, featuring a snap-on design for easy and convenient replacement.

12. Machines can be operated remotely via mobile app, with SMS alert features (upgradable)

Automatic Liquid-Liquid Extraction Instrument CH-CQ-6A Anionic Air Flow Oscillation Separation DeviceTechnical Specifications:

1. Extraction Function

(1) Time Setting: 0-999s; (2) Extraction Times: 0-99 times; (3) Extraction Interval: 0-999 seconds.

(4) Extraction Strength: adjustable from strong to weak; (5) Layering Method: automatic extraction program operation, automatic settling and layering, manual liquid release.

2. Cleaning Function

(1) Time Setting: 0-999s; (2) Washing Cycles: 0-99 times;

(3) Cleaning interval: 0-999 seconds; (4) Cleaning method: Pressure-scattered wide-angle cleaning.

3. Sample Addition: Manual Sample Addition (Optional Automatic Sample Addition)

4. Waste Liquid Treatment: Waste liquids are filtered and adsorbed by an activated carbon storage tank before being collected and processed centrally, suitable for extraction experiments with various samples.

5. Emission Treatment: Automatic exhaust, with waste gases filtered and adsorbed in a storage tank before being collected and processed centrally.

6. Display Method: 7-inch Large LCD Touch Screen

7. Sample Quantity: 6 pieces, standard with 6 x 250ml, 500ml, 1000ml, or 2000ml extraction bottles (standard 1000ml)

8. Power Voltage: 220V ± 22V, 50Hz 9. Rated Power: 400W