Key Features:

Mechanical properties

High compressive strength, bending strength, especially excellent impact resistance; tough with good adhesion, thus offering excellent anti-delamination and anti-cracking properties.

Chemical Properties

Resistant to erosion from most inorganic and organic solutions; exhibits good corrosion resistance to inorganic acids, organic acids, lactic acid, oleic acid, and fruit acids.

High and low temperature performance

Operates continuously at temperatures ranging from -40℃ to +120℃ and withstands short-term thermal shocks up to 150℃.

Hydrophilic渗透 function

A special concrete flooring structure formed by the conglomeration of water-based polyurethane and active inorganic materials, allowing water molecules to penetrate freely, nearly completely avoiding bubbling and delamination due to subgrade moisture vapor through its "breathing" function.

Anti-slip feature

Smoothness and unique textures strike a balance between easy cleaning and slip resistance in wet conditions.

Environmental friendliness

Low-VOC, odorless, and non-toxic, meeting stringent health and hygiene standards.

Excellent construction performance

No primer painting required, quick curing, 20°C application temperature, 8 hours for pedestrian traffic, 48 hours for vehicle traffic.

No need for very dry concrete subgrade (moisture content <10%); construction can be carried out on new concrete cured for 7 days.

The construction process emits almost no odor, benefiting the health of operators and preventing odor pollution.

Applicable Locations:

Food processing plants, pharmaceutical manufacturing companies, wet and dry processing areas, refrigeration and freezing zones, dairy factories, breweries, distillation workshops, laboratories, chemical processing plants, pulp and paper industry factories, warehouse and storage area flooring.

Polyurethane mortar flooring advantages:

1. The flooring surface effects are available in two series: matte and glossy, with the glossy surface being more resistant to stains and easier to clean.

2. The construction environment temperature is broad, generally allowing for construction between 0°C and 35°C.

3. Longer operational time with good leveling properties under favorable conditions.

4. Part A contains pre-mixed color paste, with minimal floor color variation and easy to apply.

5. The composite material can be stored in the cold winter in the north without the need for temperature-controlled storage.