Imported self-sealing nitrogen valve,Nitrogen Sealing Device
Import N2 Valve, Bleed N2 Valve, Tank Micro-Pressure Control Valve, Nitrogen Seal System Breathing Valve
Section 1: Self-contained Nitrogen Sealing Valve Imported Product Overview
Germany VordWODEThe imported self-sealing nitrogen valve is primarily used for constant pressure control at the top of storage tanks to protect the materials inside from nitrogenation and ensure tank safety. The nitrogen sealing valve consists of two main parts: a rapid discharge valve (nitrogen discharge valve) and an automatic pressure regulating valve (nitrogen supply valve). The rapid discharge valve is composed of a pressure controller and a single seat cutting valve.
When the pressure inside the storage tank reaches the set pressure, the rapid discharge valve quickly opens to release the excess pressure inside the tank. The low-pressure regulating valve opens the valve to inject nitrogen into the tank when the pressure inside the tank decreases. The low-pressure regulating valve must be used when the pressure is1.0MpaAt pressure, the现场 pressure is high, an automatic pressure regulating valve must be installed to reduce the pressure.1.0MpaThe following is permissible. Pressure can be set in segments, from0.5Kpa Please provide the Chinese content to be translated.66 KpaBelow, medium temperature ≤80℃。
Section II: Imported Self-sealing Nitrogen Shut-off Valve Product Features
（1Operates without external energy, capable of functioning in places without electricity or gas, offering convenience, energy savings, and cost reduction.
（2The nitrogen sealing device provides nitrogen supply, with convenient nitrogen release pressure settings, allowing for continuous operation.
（3The pressure detection diaphragm has a large effective area, with a set spring stiffness that is small, operates sensitively, and ensures a balanced working device.
（4The valve rod features a frictionless design with minimal friction, rapid response, and high control precision.
（5The nitrogen supply unit is operated by a controller, achieving a pressure reduction ratio of100:1Excellent pressure relief and high control accuracy.
（6To ensure the safety of the tank, a breathing valve must be installed on the tank top.
（7The breath valve plays a safety role, avoiding the defect of frequent opening and closing, which is prone to damage in conventional nitrogen sealing devices.
Section 3: Self-sealing nitrogen valve for import Key Technical Parameters
Nominal Bore Size(mm) | 20 | 25 | 40 | 50 | 80 | 100 | 150 | |||||
Valve Seat Diameter(mm) | 6 | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 |
Rated flow coefficientKv | 3.2 | 5 | 8 | 10 | 20 | 32 | 50 | 80 | 100 | 160 | 250 | 400 |
Pressure Regulation Range | 0.5～70 ，20～120， 60～400 ，300～700 ，500～1000 KPa | |||||||||||
Nominal PressurePN | 1.0、1.6 MPaOrANSI Class150 | |||||||||||
Medium Temperature Adjusted | 80、200 ℃ | |||||||||||
Flow characteristics | Quick-release type | |||||||||||
Adjustable Precision | ≤5% | |||||||||||
Permit pressure reduction(MPa) | 1.6 | 1.6 | 1.1 | 0.6 | 0.4 | |||||||
Effective Film Area(C㎡) | 200 | 280 | 400 | |||||||||
Permitted leakage rate | MeetsANSIB16.104—1976 IVGrade | |||||||||||
Valve cover style | Standard Type (Integrated) | |||||||||||
Cover type | Bolt-tensioned | |||||||||||
Sealed Packing Material | VType PTFE, PPL, Asbestos textile filler, Graphite filler | |||||||||||
Valve core type | Single Seat Valve Core | |||||||||||
Flow characteristics | Linear | |||||||||||
Note: German Vard Regulating Valve for OxygenWODEValves are made of stainless steel and undergo degreasing treatment.
Four: Imported Self-sealing Nitrogen Shutoff Valve Structure Diagram
Note: Due to the website layout, please contact Ward's agents for specific dimensions.
If you have any questions.Please call us, and we promise to provide you with the best service! If you need to inquire about more detailed product information, feel free to contact Germany Vorde.WODEAuthorised First-Level Distributor: Beijing Yongdebao Valve Co., Ltd.
