XiangkeDRPL-3BLarge range of small-sized samplesThermal Conductivity Tester，Protective Plate Heat Flow Meter Method
XiangkeDRPL-3BThermal Conductivity Tester (Heat Flow Meter Method)
Section 1:Overview
This instrument employs the internationally popular thermal flowmeter method for measuring thermal conductivity, paired with a computer to achieve fully automatic detection. It is a product originally developed by our company.DRPL-2Optimized design based on the original.Enhanced with automatic pressure and thickness measurement functions, capable of conducting tests under various pressure conditions, and reducing manual measurement errors.Suitable for various common materials with different thermal conductivity coefficientsWith thermal resistanceTesting requirements.
This instrument operates based on the steady-state plate method testing principle, adding a stable surface temperature on the hot side, where heat is transferred through the sample to the cold side. The heat flux is measured, and the thermal conductivity and thermal resistance can be calculated based on the sample's thickness and heat transfer area. This testing method is simple, quick, and has good repeatability. It is highly suitable for research and development in material heat transfer. It can be used for nylon, plastic,SiliconRubber, graphite, thermal insulation materials, etc., are widely used for testing in colleges and universities, research institutions, quality inspection, and industrial and mining enterprises.
This instrument refers to the following standard:ASTM C518-04A testing method for determining steady-state heat flux and heat transfer characteristics using a thermal flowmeter.GB10295-2008Determination of Steady-State Thermal Resistance and Related Properties of Insulating Materials (Heat Flow Meter Method)、GB/T25261-2018Reflective Insulating Coatings for Architectural Use AppendixAThermal Conductivity Measurement。
II. Main Technical Parameters
1Thermal conductivity range: Low thermal conductivity materials0.0100~5W/mkHigh thermal conductivity materials3~500W/mkAccurate to four decimal places.
2Accuracy:Superior±4Percent, Repetition:±2%。
3Hot noodle temperature:Room Temperature+10~150.00°C or room temperature+10~ 300.00℃，Choose from two specifications.;Utilizing highPlease provide the Chinese content you would like translated into American English.Temperature display and measurement gaugeDistinguishRate0.1℃。
4Cold Noodles Temperature:5~70°C, with constant temperature water bath cooling;Utilizing highPlease provide the Chinese content to be translated.Digital temperature gauge reading0.2Grade precision, dividedIdentifyRate0.01℃。
5Hot noodle temperature control:Room Temperature+10~150.00°C or room temperature+10~300.00℃，Choose from two specifications.;IdentifyRate0.1°C, flat heater, bi-directional silicon-controlled rectifier control.
6Automated computer testing, data processing, and the generation of test reports with printed output are available.
7Thermal flow range:80-2000W/m2。
8With an acrylic wind shield, the experimental process can be directly observed.
9Tested Face Dimensions:100×100mm，Or diameter60mmChoose from two available sizes.
10Equipped with heat-insulating devices to ensure testing accuracy.
11、Equipped with automatic pressure and thickness measurement functions, it detects the thermal conductivity and thermal resistance under different pressure states, highly suitable for compressible materials.
Automatic Pressure Measurement:0.0～1000.0N，
Automatic Displacement Measurement:0.00～100.00mm，
12、Loading/Unloading Method: Stepper Motor，
13、Voltage:220V,50HZ。
14Supplied with a powder sample box for powder testing.
Instrumentation Configuration: IncludedDRPL-3BOne test host, one software set, one high-precision constant temperature water bath, one computer (as per contract specifications).
