Xiangtan XiangkeCLDFrost Resistance Tester for Ceramic TilesConcreteFreezing-Thawing Test Chamber

This instrument is a specialized equipment for measuring the frost resistance of ceramic tiles, and the instrument meetsGB/3810.12-2016andISO10545-12：1995Ceramic Tile Test Method: Requirements for Frost Resistance Determination.CLD-IIAlso available in various stylesJG/T 243—2009"Concrete Freeze-Thaw Resistance Test Equipment"\GB/T4111-2013Requirements for concrete block and brick testing methods.

I. Main Technical Parameters

1Test Area Temperature Range Adjustment:

CLD:Applicable Ceramic Tiles:-15℃—+15℃；

CLD-IIApplicable Concrete:-30℃—+20℃。

2Testing Zone:600×600×300(millimeters)

3Temperature Control Accuracy:±1℃；

5Testing Method: Automatically cycles to completion according to the set number of test iterations.

6Power supply: 220V ±10%  2.5 kw；

II. Working Conditions

1Ambient Temperature:0～40℃；

2Power supply: 220V，50 HZ；

3Available with water inlet and outlet piping.

III. Instrument Composition

     The instrument consists of three parts: a freezing test chamber, an inflow and outflow system, and a temperature control and automatic control system.

    The working principle of this instrument is as follows:GB/3810.12-2016Designed to meet national standards.

      Set the electronic counter to the required number of test cycles according to the test specifications.100Place the specimen in the testing area, and then cover the lid. Refrigerate to freeze the testing area.-5˚CMaintain15Minute, activate the water pump to spray water onto the sample to raise the test temperature to+5˚CMaintain15Minute, the counter counts once, and set the electronic counter to the required number of test cycles according to the test requirements.100Automatically perform the above cyclic test, and an alarm will be issued upon completion.

Configuration: IncludedCLDOne main unit, one stainless steel specimen holder.