XiangkeRBC-II-20KNThermal plate differential temperature testing device, thermal insulation performance tester for insulating materials, cold face temperature tester

One,Overview

Two,The equipment is suitable for measuring the insulating performance of thermal insulation materials and the pressure resistance of materials under certain temperature conditions. The instrument measures the sample at room temperature~1000℃The temperature difference between both sides of the material, which changes over time within the temperature range, is used to determine the thermal insulation properties; the hot surface achieves a steady-state heat source, room temperature~1000℃Temperature control with automatic collection of temperature and time data, accurately testing the back temperature of the cold face sample and automatically collecting temperature and time data; the equipment can achieve electric loading0~20KNThe pressure ensures a tight contact between the specimen and the temperature measuring end, and is equipped with a sample deformation detection function, capable of conducting tests under various pressures and deformation amounts.

II. Principle of Operation: Under set temperatures and pressures, heat from the hot surface is transferred to the cold surface through the specimen. The temperature at different test points on the hot and cold surfaces is measured and recorded by thermocouples, and in conjunction with a computer, it achieves automatic detection and generates an experimental report. III. Instrument Composition: Temperature Control System: Mainly composed of silicon carbide rods,可控硅, thermocouples, etc., controlled by temperature instruments for heating. The heating capacity of the temperature zone can reach the highest temperature of up to1000℃Equipped with7Road temperature acquisition channel, with the heating temperature channel in a closed-loop temperature zone control, the rest of the heating plates, hot surfaces, and cold surfaces are arranged accordingly.2One temperature measurement point. Pressure system: Mainly composed of a pressure motor, displacement sensor, pressure sensor, etc. The pressure motor can be adjusted to the set pressure or displacement and displays the current status in real-time. Can be used for constant pressure or constant thickness detection. Cooling system: Mainly composed of a chiller (constant temperature water tank), thermocouple, etc. The chiller cools the heated part of the equipment, and the thermocouple detects the bottom temperature. When the bottom temperature >40℃When prompted, please turn on the cold water machine. Computer system: equipped7Road temperature acquisition channel, connected to the computer for automatic testing and data processing.

Main Technical Parameters:

1Test sample table dimensions:100*100mmSample thickness range:0.5mm~80mm(Note: Other sizes and specifications can be customized according to customer requirements.)

Maximum temperature for hot noodles1000℃Heating Retention Time20Over a minute. Temperature control accuracy ±1℃。（Note: From room temperature up to300℃、500℃、800℃、1000℃、1200℃Available in various specifications (as applicable)

3Heating Rate:0~30℃/minAdjustable

4Hot Noodles1One temperature control point.2One temperature sensing point, the thermal face material is durable for long-term use.1000℃。

5Cold Noodles2One temperature sensing point, with a cold surface contact end made of heat-resistant stainless steel. (Note: The instrument is equipped with...)7Road temperature collection channel, additional temperature collection points can be added via external temperature collection wires for multi-layer testing.)

6Instrument equipped with an automatic loading device, connected to a computer for automatic control, pressure0~20KNAdjustable, pressure control accuracy±20N(Note: There is)0~1KN、0~10KN、0~20KN、0~30KNChoose from various specifications.

7Equipped with deformation measurement function, it measures the thickness change of the sample under different pressures.

8Pressure, temperature, sample thickness(Displacement amount)All displayed by digital instruments, capable of connecting to computer control, data processing, and generating detection reports, and can be usedUPass the data through the plate, then print the output.

9High-Temperature Protection Device: Anti-scald protection measures with high-temperature prevention, including sample testing and additional protective cover.

10Samples can be heated on the hot plate to the required temperature before placement, and manual loading is required.

11Equipment connects to a computer for automatic testing, data processing, and saves curves and test data.

12Voltage:220V,50HZ.Power2KW.