Import Automatic Backwash Filter

　　America's V-guardVTONImported Full-Automatic Backwashing FilterComposed of a carbon steel cylinder, a special-shaped stainless steel mesh screen, a butterfly valve, and a drainage device. When the filter is in operation, the butterfly valve is open, allowing water to flow into the filter through the inlet, filtered through the mesh, and exit at the outlet. When drainage is needed, close the butterfly valve and open the drainage valve. Water flows through the first half of the mesh for filtration, with some water exiting into the system, while the remaining water enters the inner side from the outer half of the mesh, draining out through the drainage port, thus performing a reverse automatic flushing of the mesh. The entire flushing process allows the system to operate normally without requiring shutdown.

　　Key Technical Parameters of Imported Automatic Backwash Sewage Filter:

Nominal Pipe Size: DN50 ~ DN800

Nominal Pressure: 1.0 Mpa to 4.0 Mpa

Applicable Temperature: -10℃ ≤ T ≤ 425℃

Applicable Media: Water, oil, steam, etc.

Valve Body Material: Carbon Steel, Stainless Steel

Connection Type: Flanged Connection

Filter Efficiency: 80%-99%

Pressure Loss: ≤0.002 Mpa

Flow Rate: 4.4T/H - 2450T/H

　　Imported fully automatic backwashing effluent filter structural features:

1. High filtration accuracy, stable water quality output.

2. Equipped with its own search and adaptation functions, it achieves automatic backwashing to handle fluctuations in water quality without the need for manual intervention.

3. The control system is highly responsive, with dual-set functions for pressure difference and time. It can flexibly adjust the backwashing pressure difference or time setting values based on different water sources and filtration accuracy.

4. High-efficiency and thorough cleaning, with filters that can be fully restored to their original state, allowing for lifelong use without the need for replacement.

5. Backflushes without interrupting normal water production, runs continuously, and is stable and reliable.

6. Short backwash duration, with backwash water consumption only 0.001-0.002% of the normal water output, saving water, electricity, and energy.

7. Compact and rational structural design, with minimal land area, and easy installation and mobility.

8. Equipment has minimal wearing parts, no consumables, low operation and maintenance costs, and simple operation management.

9. Broad application scope, suitable for various raw water qualities and water usage requirements.

　　Imported Automatic Backwash Filter Structural Diagram:

Note: Due to the website layout, please contact VTON's authorized agents for specific dimensions.

　　American VisonVTONImport Automatic Self-Cleaning FilterThis equipment features the ability to filter raw water and automatically clean and drain the filter core without interrupting the water supply. Compared to previous filters, it boasts high automation, large processing capacity, self-cleaning and draining capabilities, continuous water supply, and wide applicability. Filters are essential for products that require hydraulic control valves and precise, easily clogged mechanical items. It is an indispensable component in the pipeline series for conveying media, typically installed at the inlet of devices such as hydraulic control valves, pressure-reducing valves, relief valves, and level control valves. Its purpose is to remove impurities from the medium, prevent granular impurities from entering the channels to cause clogs, and protect the fittings on equipment pipelines from wear and blockage. If you have any questions, please call us, and we will be committed to providing you with the best service. For more detailed product information, please contact VTON's authorized first-level agent in the United States, Beijing Yongdebao Valve Co., Ltd.