Product Specifications
Brand: YingTeng
Model: YTZL420M
Test Conditions: 20°C, 60%
Dehumidification capacity: 1.5 kg/h
Airflow/Excess Pressure: 420/100 PA m³/h
Regenerated Airflow/Excess Pressure: 135/50 PA m³/h
Operating Power / Current: 2.5kW / 10.8A
Voltage/Frequency: 220V/50Hz
Regeneration Heating Method: Electric Heating PTC
Frame Material: Cold Rolled Steel / Stainless Steel
Electrical Shock Protection Type: Type Ⅰ
Waterproof Rating: IPX3
Air Filtration Treatment: Pre-Effect G4
Regenerated Air Filter: Initial Efficiency G4
Control Method: LCD + Buttons
Length: 930mm
Width: 513mm
Height: 622mm
Handle air intake: Φ160mm
Handle Exhaust: Φ160mm
Regenerated Inlet: Φ100mm
Rebirth Airflow: Φ100mm
Manufacturer: Henan Tongteng Explosion-proof Electrical Appliances Co., Ltd.
Note: The above technical specifications are for reference only; the physical unit shall prevail.
Product Features
Sweden Proflute
The core turbine is equipped with the top-tier international brand Swedish Proflute turbine, which boasts an exceptionally long lifespan—operating continuously for 10 years without any malfunctions and maintaining optimal dehumidifying performance.
SCR
Utilizing SCR energy-saving constant temperature control technology, it effectively ensures the stability of the heating system, allowing for worry-free long-term operation.
Low Dew Point Dehumidification Operation
Even in extreme environments where traditional condensation dehumidification methods fail due to very low dew points, our system still ensures efficient dehumidification with an expanded dehumidification range.
PTC
The regenerative heating utilizes the latest German PTC thermistor, reducing the PTC's hazardous thermal radiation distance. In addition to retaining the typical characteristics and advantages of PTC thermistor heating, it also improves the efficiency of regenerative heating by 10% to 15%, demonstrating significant energy-saving effects.
Stop Turn Protection Mode, for added peace of mind
The desiccant wheel comes with a stop rotation protection feature, effectively monitoring the wheel's operation to ensure the equipment runs smoothly.
Smart Control System, Precise Humidity Control
Set the target humidity level, the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.
The core component of the rotary dehumidifier is a honeycomb rotor, made of a special ceramic fiber carrier and an active silicone composite; the rotor is divided into two zones on either side by a custom-sealed device: the processing zone and the regeneration zone.
As moist air requiring dehumidification passes through the treatment area of the wheel, the moisture vapor in the wet air is adsorbed by the active silica of the wheel, while the dried air is sent to the space requiring processing by the treatment fan. The wheel, which continuously and slowly rotates, carries the approaching-saturation moisture vapor into the regeneration area. In the regeneration zone, the hot air blown in reverse desorbs the moisture adsorbed in the wheel, which is then exhausted outdoors by the fan, restoring the wheel's moisture adsorption capability and completing the regeneration process.
Utilizing imported honeycomb-shaped silicone desiccant rotors, these are formed into a cylindrical disc with a desiccant and regeneration zone within the ceramic silicone crystal-constructed housing. Air for dehumidification passes through the desiccant zone, where the rotor absorbs moisture from the air, resulting in dry air. After absorbing moisture, the desiccant zone rotates to the regeneration zone, where heated air carries the moisture out of the rotor and expels it outdoors. Once the moisture is released in the regeneration zone, the rotor rotates back to the desiccant zone, where the process repeats continuously. This provides a stable supply of dry air.
