Product Specifications
Brand: YingTeng
Model: YTZL1500M
Test Conditions: 20°C, 60%
Dehumidification capacity: 10 kg/h
Handling air volume/excess pressure: 1550/250 PA m³/h
Regenerated Airflow/Excess Pressure: 580/150 PA m³/h
Operating Power / Current: 13kW / 20A
Voltage/Frequency: 380V/50Hz
Regeneration Heating Method: Electric Heating PTC
Frame Material: Cold Rolled Steel / Stainless Steel
Electrical Shock Protection Type: Type I
Waterproof Rating: IPX3
Air Filtration Treatment: Pre-Filter G4
Regenerated Air Filter: Pre-Filter G4
Control Method: LCD + Buttons
Length: 1370mm
Width: 1120mm
High: 720mm
Handle inlet: Φ200mm
Dealing with Air Outlet: Φ200mm
Regenerated inlet: Φ150mm
Rebirth Exhaust Vent: Φ150mm
Manufacturer: Henan Tongteng Explosion Proof Electrical Equipment Co., Ltd.
Note: The above technical specifications are for reference only; the physical unit is the definitive standard.
Product Features
Sweden Proflute
The core wheel is equipped with the top-tier international brand Swedish Proflute wheel, boasting an exceptionally long lifespan of 10 years of continuous operation without failure, and maintaining its dehumidification performance.
SCR
Utilizing SCR energy-saving constant temperature control technology, it effectively ensures the stability of the heating system, offering peace of mind for long-term operation.
Low Dew Point Dehumidification Operation
At extremely low dew points where traditional condensation dehumidification methods can no longer continue, our system still ensures efficient dehumidification with an expanded dehumidification range.
PTC
The regenerative heating utilizes the latest German PTC thermistor, shortening the PTC's thermal radiation hazard distance. In addition to maintaining the characteristics and advantages of the usual PTC thermistor heating, it also improves the regenerative heating efficiency by 10% to 15%, demonstrating significant energy-saving effects.
Trip-free protection mode, for added peace of mind
The desiccant wheel is equipped with a stop rotation protection feature, which effectively monitors the wheel's operation to ensure the equipment runs smoothly.
Intelligent Control System, Precise Humidity Control
Set the target humidity level, the intelligent control system will achieve automatic and precise humidity control to reach the target humidity.
The core component of the rotary desiccant dehumidifier is a honeycomb-shaped wheel, made of a special ceramic fiber carrier and composite active silicone; the wheel is divided into two zones by a custom sealing device on either side: the processing zone and the regeneration zone.
As moist air requiring dehumidification passes through the wheel's treatment zone, the water vapor in the moist air is adsorbed by the wheel's active silica gel, while the dried air is blown to the space for treatment by the handling fan. The wheel, which continuously and slowly rotates, carries the approaching-saturation water vapor into the regeneration area. Hot air吹入再生区 reversely, causing the adsorbed moisture in the wheel to desorb, and the fan exhausts it outdoors, restoring the wheel's moisture adsorption capacity and completing the regeneration process.
Utilizing imported honeycomb silicone desiccant rotors, the rotors are formed into a cylindrical disc with a honeycomb structure. These are then rotated within a ceramic silicone crystal-constructed desiccant and regeneration zone chamber. Air for drying passes through the desiccant area, where the rotor absorbs moisture from the air, resulting in dry air. After absorbing moisture, the desiccant area rotates to the regeneration zone, where heated air carries the moisture out of the rotor and expels it outdoors. Once the moisture is released, the rotor returns to the desiccant area, where the process of drying and regeneration is continuously repeated, providing a stable supply of dry air.
