ZJL Series Submerged Slurry Pumps

ZJL Series Product Introduction

The ZJL submersible slurry pump features a single-stage, single-suction, cantilevered structure, connected by bearing housing, support base, and connecting pipe to the pump's hydraulic components. The liquid is discharged through the discharge pipe component. The pump impeller is a semi-open impeller with mixing blades at the extension of the impeller blade inlet. The main characteristic of this pump is that the shaft in the submersible section has sufficient rigidity, and there are no bearings or shaft seals between the impeller and the pump casing, allowing for the conveyance of media containing high concentrations of solid particles. The pump can be inserted into the liquid at lengths ranging from 800 to 2000mm, and an intake pipe can be provided upon request. The shaft seal is designed for larger pumps to operate submerged without a seal, with power transmission provided by a vertical motor mounted on the motor support and support base, connected to the pump via a coupling.

Primarily used for suction of thick liquids, heavy oils, oil sludge, polluted liquids, mud, slurry, flowing sand, and flowing sludge in urban drainage channels, as well as fluids containing silt, sand, and corrosive liquids in industries such as environmental protection, municipal engineering, thermal power plants, coal gasification plants, oil refineries, steel mills, mining, papermaking, cement factories, food factories, and dyeing and printing.