I. Overview:
The training table is constructed with a metal frame, equipped with drawers (with locks) measuring 1400mm×700mm×750mm. The table top is covered with an antistatic mat and features a fluorescent lamp and a small component box. Additionally, all tools required for assembly and disassembly (screwdriver, Allen wrench, spanner, gloves, etc.) are provided.
I. Disassembly and Assembly Training Content
Gear Pump Disassembly, Measurement, and Principle Analysis
2. Piston Pump Disassembly and Principle Analysis
3. Disassembly and Principle Analysis of Blade Pumps
4. Actuator disassembly and assembly (hydraulic cylinders, hydraulic motors)
5. Directional Valve Disassembly and Operation Principle Analysis (Electromagnetic Directional Valve)
6. Overflow Valve Disassembly and Principle Analysis
7. Pressure Valve Disassembly (all types of overflow valves, pressure reducing valves, pressure switches, sequence valves)
8. Flow Control Valve Disassembly and Principle Analysis (Speed Control Valve, Throttle Valve)
II. Configuration List
| Serial Number | Name | Model | Quantity | Note |
| 1 | Low-pressure gear pump | CB-B4 | 2 | |
| 2 | Leaf pump | YB-10B | 1 | |
| 4 | Direct-acting overflow valve | DBDH | 1 | |
| 6 | High-Pressure Relief Valve | DB-10 | 1 | |
| 7 | Pressure Relief Valve | J-10B | 1 | |
| 8 | Throttle valve | L-10B | 1 | |
| 9 | Check Valve | I-10B | 1 | |
| 10 | Electromagnetic Directional Valve | 24E-10B-DV24 | 1 | |
| 11 | High Pressure Directional Control Valve | 3WE6A-220V | 1 | |
| 12 | Single-acting hydraulic cylinder with rod | φ50/25-125 | 1 | |
| 13 | Variable plunger pump | SCY14-1B | 1 | |
| 14 | Blade Motor | FQ | 1 | |
| 15 | Pressure Relay | HX | 1 | |
| 16 | Speed control valve | Q-Type Flow Control Valve | 1 | |
| 17 | Disassembly tools | A set of hexagon wrenches, two adjustable wrenches, a screwdriver, a pair of pliers, a metal ruler, and an inner card. | 1 |
