Model: YT-9168E(GD)
Brand: YingTeng
Dehumidification Capacity (Condition: 90%RH at 30℃): 7 kg/h
Power: 220/V380V/50Hz
Input Power: 2820W
Defrosting Method: Automatic Defrost
Recirculating air volume: 2000 m³/h
Drainage Method: Hose Drainage
Airflow Direction: Front Air Delivery, Rear Air Inlet
Operating Temperature: 5-38℃
Weight: 85 kg
Dimensions: Length 1100mm, Width 700mm, Height 700mm
Note: Customizable explosion-proof models available. The above technical specifications are subject to change without notice; please refer to the actual machine for the most accurate information!
Automatic humidity control dehumidifier with settings from 10%-90% humidity, no need for staff supervision. Simply set it up and it runs automatically (the dehumidifier turns on to remove moisture when humidity is too high; it goes into standby when humidity reaches the set point), achieving a user-friendly, fully automatic control and energy-efficient operation.
The machine's humidity control switch can be isolated and placed at any convenient location for users to control and observe in real time.
Multiple protections: The unit is equipped with overloads, short circuits, phase failures, overheating, high voltage, low voltage, and other protections.
Machine features automatic fault detection; upon occurrence of a fault, the machine automatically identifies the cause and displays the corresponding fault code for easy repair.
Utilizes internationally renowned brand compressors, powerful performance, and effective dehumidification.
Designs automatic defrosting function, the dehumidifier will frost when the temperature drops below 18°C. To ensure better operation, an automatic defrosting sensor function is added to ensure normal use at low temperatures.
Ceiling Dehumidifier Principle
On the basis of a standard dehumidifier, additional configurations are added, with adjustments to air volume and pressure. The intake and exhaust are connected to the machine using flanges and ducts, drawing moist air from the room into the machine through the site's piping for processing. The dried air is then returned to the room, thus循环ing to achieve dehumidification.
