Product Specifications
Model: YT-926E(GD)
Brand: YingTeng
Dehumidification Capacity (Condition: 90%RH, 30℃): 26L/D
Power: 220V/50Hz
Input Power: 500W
Defrosting Method: Automatic Defrost
Re-circulating Airflow: 185 m³/h
Drainage Method: Hose Drainage
Airflow Direction: Front blowing, rear intake
Operating Environment Temperature: 5-38℃
Weight: 18 kg
Dimensions: Length 655mm, Width 312mm, Height 210mm
Note: Customized explosion-proof models are available. The above technical specifications are subject to change without notice; please refer to the actual machine for the most accurate information!
Automatic humidity control dehumidifier with settings from 10%-90% humidity, no need for staff supervision; simply set it up and it runs automatically (the dehumidifier turns on to remove moisture when humidity is too high; it remains in standby when humidity is reached), offering a user-friendly fully automatic control with high efficiency and energy-saving.
The machine's humidity control switch can be isolated and placed at any convenient location for users to control and observe in real-time.
Multiple Protections: The unit is equipped with protections against overload, short circuit, phase loss, overheat, high voltage, low voltage, etc.
Machine features automatic fault detection; if a fault occurs, the machine will automatically identify the cause and display the corresponding fault code for easy repair.
Utilizes high-quality international brand compressors for powerful performance and effective moisture removal.
Designs an automatic defrost function. The dehumidifier will frost when the temperature drops below 18°C, to ensure better operation, an automatic defrosting sensor function is added to ensure normal use at low temperatures.
Ceiling-mounted Dehumidifier Principle
Based on standard dehumidifiers, we've enhanced the configuration, adjusted and increased air volume and pressure. The intake and exhaust are connected to flanges and ducts, drawing moist indoor air into the machine through the site's piping for processing. The dried air is then returned to the room, thereby creating a cycle to achieve dehumidification.
