KDPJW-20 Model Automotive Wheel Radial Load Fatigue Tester
I. Overview:
1. Application: This testing machine is primarily used for radial load fatigue tests on passenger car wheels. It operates in a single-station testing mode and is randomly equipped with a test accessory (tailored to the dimensions or design of the test piece provided by the customer). Additionally, two more testing stations are available (with the option for different loading loads on each station).
2. Reference Standard:
2.1 GB 36581-2018 "Automotive Wheel Safety Performance Requirements and Test Methods"
2.2 GB/T 5334-2021 "Passenger Cars - Wheel - Requirements and Test Methods for Bend and Radial Fatigue Performance"
Section II: Main Technical Specifications:
1. Main Unit: Vertical Frame
2. Speed Control: Variable Frequency Speed Control
3. Test Stations: 1 (or 2, with different loading capacities per station)
4. Loading Method: Servo electric cylinder closed-loop loading method
5. Maximum Test Force: 20kN (other specifications: 30kN, 50kN, 80kN, 100kN, 500kN) - Optional Indication Accuracy: 20% FS and up ±1%
6. Test Speed: MAX: 140 km/h
7. Test speed range: 20-140 km/h
8. Drum radial跳动: < 0.25mm
9. Drum imbalance: < 15g
10. Drum surface roughness: < 3.2μm
11. Drum Diameter: 1700 ± 0.25 mm
12. Drum Face Width: 400mm
13. Test Wheel Diameter: 13-24"
14. Test Wheel Width: 4-12"
15. Test tire outer diameter: Φ500-Φ1000mm
16. Equipment Dimensions (Length x Width x Height): 5000×1600×2800mm
17. Equipment Weight: 6,000 kg
18. Variable Frequency Motor Power: 37kW
19. Servo Motor Power for Electric Cylinder: 1.5 kW
20. Show cumulative test次数 and test mileage: 107 Shuts off automatically after reaching the set number of cycles.
21. Display test speed and cumulative test times: 106；
22. Sealed mining frame structure with air-cooling equipment for tire temperature reduction during testing.
23. Equipped with a tire-pressure monitoring system that automatically shuts down the machine when excessive pressure loss is detected, preventing tire blowouts.
