Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has 7 business centers: boiler, deep-freeze container, pressure vessel, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory areas on Jinnan Road, East Yangtze Road, and Bohai Road, covering a total of 200,000 square meters. The main workshop spans 83,000 square meters. Currently, it has 710 employees, including 247 engineering and technical personnel and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
When a gas-fired steam boiler experiences overpressure, the following immediate measures must be taken: 1. Shut off gas supply: First, immediately close the gas supply to cut off the fuel source and stop the combustion process to prevent further increase in steam pressure. 2. Release pressure: Open the boiler's pressure release device, typically a safety valve. The safety valve is a crucial safety feature of the boiler that automatically opens when the internal pressure exceeds the set value, releasing overpressure steam to reduce the boiler pressure. 3. Decrease burner load: If the overpressure is due to excessive burner load, reduce the burner load to decrease steam production and lower the boiler pressure. Adjust the gas supply to the burner or the burner's adjustment method to match the current load requirements. 4. Inspection and maintenance: After an overpressure event, inspect and maintain the boiler to identify the cause of overpressure and make repairs. Possible causes include burner malfunctions, control system failures, valve malfunctions, etc. If necessary, consult a boiler maintenance professional for inspection and maintenance. It is important to note that overpressure is a dangerous condition during boiler operation and must be addressed promptly. When dealing with overpressure, operators should remain calm, follow safety operating procedures, and ensure their own safety. If unsure how to handle an overpressure situation, immediately contact a boiler maintenance professional or relevant technical support for assistance.

If a gas boiler gas leak is detected, immediate actions must be taken to handle it: 1. Immediately shut off the gas supply: First, quickly close the gas supply valve to cut off the gas supply. This prevents further leakage and reduces safety risks. 2. Ventilate the area: Open windows and doors to ensure proper indoor air circulation and expel any remaining gas. This lowers the indoor gas concentration, reducing the risk of explosion and poisoning. 3. Avoid open flames and electrical appliances: In the event of a gas leak, avoid using open flames and electrical equipment to prevent fires or sparks that could trigger an explosion. 4. Do not operate electrical switches: Do not operate electrical switches, including lights, TVs, computers, etc., to prevent sparks that could cause an accident. 5. Contact the gas company or personnel: Promptly contact the local gas company or personnel to report the gas leak situation and request their inspection and repair. 6. Do not use a phone or make calls: In case of suspected gas leaks, do not use a phone or make calls to avoid static electricity that could cause an explosion. 7. Keep away from the leak area: Stay as far away from the leak area as possible to ensure your safety. Do not approach the gas boiler or the leak point to avoid injury. Remember, handling a gas boiler gas leak is a dangerous task that requires caution. It is best handled by professionals to ensure safety.

Yes, durable thermal oil boilers typically have a longer service life. Here are some reasons: Material Quality: Thermal oil boilers are manufactured with high-quality materials, such as heat-resistant and corrosion-resistant steel and alloy materials. These materials can withstand high temperatures and pressures, offering good durability and anti-corrosion properties, thereby extending the boiler's lifespan. Design and Manufacturing Process: Durable thermal oil boilers usually adopt designs and manufacturing processes that ensure longevity. Rational structural design and precise manufacturing techniques reduce stress concentration and thermal stress, enhancing the boiler's stability and durability. Regular Maintenance and Care: Regular maintenance and care of thermal oil boilers are crucial for extending their service life. Regularly cleaning and inspecting the internal pipes, flues, and burners, and promptly replacing worn-out parts, can minimize breakdowns and damage, extending the boiler's life. Proper Operation and Management: Correct operation and management are also vital factors in ensuring the longevity of thermal oil boilers. Operators should follow the operation manual and procedures, avoid overloading and improper operation, to ensure the boiler operates safely and stably. It's important to note that even durable thermal oil boilers require regular inspections and maintenance to ensure proper operation and extend their service life. Additionally, the lifespan of the boiler is influenced by factors such as the operating environment, load conditions, and operating methods. Therefore, reasonable use and maintenance are key to ensuring the longevity of thermal oil boilers.

Proper selection of a thermal oil furnace requires considering the following aspects:  Thermal Load Requirement: First, determine the thermal load required by the thermal oil furnace, i.e., the heat energy needed to be supplied. Establish the rated power and thermal load range of the furnace based on actual needs to ensure it can meet the required heat energy supply. Operating Temperature and Pressure: The operating temperature and pressure range of the thermal oil furnace must match the actual application scenario. Choose the appropriate temperature and pressure range based on process requirements and working environment to ensure stable operation of the furnace. Thermal Oil Type: Select the appropriate type of thermal oil based on process requirements and working environment. Common types include silicone thermal oil, organic thermal oil, and mineral oil thermal oil, each with different operating temperature ranges and performance characteristics. Choose according to actual needs. Equipment Quality and Reputation: Choose a thermal oil furnace supplier with a good reputation and quality. Ensure the manufacturing process and material quality of the furnace are reliable, providing stable and reliable performance and after-sales service. Safety and Environmental Protection: The safety and environmental protection of the thermal oil furnace are important considerations. Select a furnace with safety protection devices and environmental certifications to ensure safety for personnel and equipment during operation. Economic and Energy Efficiency: Consider the economic and energy efficiency of the thermal oil furnace. Choose a furnace with high energy efficiency and energy-saving features to reduce energy consumption and operating costs. Considering all these factors, selecting an appropriate thermal oil furnace based on actual needs can ensure the stable operation of the equipment.
Shandong Zhongjie Special Equipment, welcome customers to visit our factory for business discussions.