Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has 7 business centers: boiler, deep-freeze container, pressure vessel, central air conditioning, engineering installation, international trade, and Internet of Things. It has three manufacturing sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. The company currently employs 710 people, including 247 engineers and technicians, and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province," and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
When a gas steam boiler experiences overpressure, the following immediate measures must be taken: 1. Shut off gas supply: First, immediately close the gas supply to cut off the fuel source and stop the combustion process to prevent further increase in steam pressure. 2. Release pressure: Open the boiler's pressure relief device, typically a safety valve. The safety valve is a crucial safety feature of the boiler. When the internal pressure exceeds the set value, the safety valve automatically opens to release the excess pressure steam, thereby reducing the boiler pressure. 3. Reduce burner load: If the overpressure is caused by excessive burner load, reduce the burner load to decrease steam production and lower the boiler pressure. Adjust the gas supply to the burner or the burner's control method to match the current load requirements. 4. Inspection and maintenance: After an overpressure event, inspect and maintain the boiler to identify the cause of the overpressure and make repairs. Possible causes include burner failure, control system failure, valve malfunction, etc. If necessary, call in a boiler maintenance technician for inspection and maintenance. It is important to note that overpressure is a dangerous condition during boiler operation and must be addressed promptly. When dealing with overpressure, operators should remain calm, follow safety operating procedures, and ensure their own safety. If unsure how to handle an overpressure situation, immediately contact a boiler maintenance technician or relevant technical support personnel for assistance.

If gas boiler gas leakage is detected, the following measures must be taken immediately to handle the situation: 1. Immediately shut off the gas supply: First, quickly close the gas supply valve to cut off the gas supply. This prevents further leakage and reduces safety risks. 2. Ventilation: Open windows and doors to ensure good indoor air circulation and expel any remaining gas. This lowers the indoor gas concentration, reducing the risk of explosion and poisoning. 3. Avoid open flames and electrical appliances: In the event of gas leakage, avoid using open flames and electrical equipment to prevent fires or sparks that could cause an explosion. 4. Do not operate electrical switches: Do not operate electrical switches, including lights, televisions, computers, etc., to prevent sparks that could cause an accident. 5. Contact the gas company or personnel: Promptly contact the local gas company or personnel to report the gas leakage and request their inspection and handling. 6. Do not use a phone or make calls: In case of suspected gas leakage, do not use a phone or make calls to prevent static electricity from causing an explosion. 7. Keep away from the leakage area: Keep a safe distance from the leakage area to ensure personal safety. Do not approach the gas boiler or the leakage point to avoid injury. Remember, handling gas boiler gas leakage is a dangerous task that requires caution. It is best handled by professionals to ensure safety.

Yes, durable thermal oil boilers generally have a longer service life. Here are some reasons: - Material Quality: Thermal oil boilers are made with high-quality materials, such as heat-resistant and corrosion-resistant steel and alloy materials. These materials can withstand high temperatures and pressures, offering excellent durability and corrosion resistance, thereby extending the boiler's lifespan. - Design and Manufacturing: Long-lasting thermal oil boilers typically utilize sophisticated design and manufacturing techniques. Reasonable structural design and precise manufacturing processes reduce stress concentrations and thermal stress, enhancing the boiler's stability and durability. - Regular Maintenance: Regular maintenance and upkeep of thermal oil boilers are crucial for extending their service life. Regularly cleaning and inspecting the boiler's internal pipes, flues, and burners, and promptly replacing worn parts, can minimize malfunctions and damage, extending the boiler's lifespan. - Proper Operation and Management: Correct operation and management are also vital factors in ensuring the longevity of thermal oil boilers. Operators should follow the operation manual and procedures, avoid overloading and improper operations, and ensure the boiler operates safely and stably. It is important to note that even durable thermal oil boilers require regular inspections and maintenance to ensure proper operation and extend their service life. Additionally, the lifespan of the boiler is influenced by factors such as the operating environment, load conditions, and operating methods. Therefore, proper use and maintenance are key to ensuring the longevity of thermal oil boilers.

Proper selection of a thermal oil heater requires considering the following aspects: 1. Thermal Load Requirement: First, determine the thermal load required by the thermal oil heater, i.e., the heat energy needed to be supplied. Based on actual requirements, decide on the rated power and thermal load range of the heater to ensure it can meet the required heat energy supply. 2. Operating Temperature and Pressure: The operating temperature and pressure range of the thermal oil heater must match the actual application scenario. Choose the appropriate temperature and pressure range based on process requirements and working environment to ensure stable operation of the heater. 3. Thermal Oil Type: Select the appropriate type of thermal oil based on process requirements and working environment. Common types include silicone thermal oil, organic thermal oil, and mineral oil thermal oil, each with different operating temperature ranges and performance characteristics. Choose according to actual needs. 4. Equipment Quality and Reputation: Choose a thermal oil heater supplier with a good reputation and quality. Ensure the manufacturing process and material quality of the heater are reliable, providing stable and reliable operation performance and after-sales service. 5. Safety and Environmental Protection: The safety and environmental protection of the thermal oil heater are important considerations. Choose a heater with safety protection devices and environmental certifications to ensure safety for personnel and equipment during operation. 6. Economic and Energy Efficiency: Consider the economic and energy efficiency of the thermal oil heater. Choose a heater with high energy efficiency and energy-saving features to reduce energy consumption and operating costs. By considering these factors and selecting an appropriate thermal oil heater based on actual needs, you can ensure the stable operation of the equipment.
Shandong Zhongjie Special Equipment, welcome customers to our factory for business discussions.