Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company operates seven business centers: boilers, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and the Internet of Things. It has three manufacturing sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. The company currently employs 710 people, including 247 engineers and technicians and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise of Shandong Province" by the Industrial and Information Technology Department. In June 2022, it was recognized as a "Gazelle Enterprise of Shandong Province" and in August 2022, as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
The management system for incidents related to gas thermal oil heater equipment mainly includes the following aspects: 1. Equipment Safety Management System: Establish and improve the safety management system for gas thermal oil heater equipment, clarify responsibilities and authorities, and ensure the safe operation of the equipment. This includes equipment operation procedures, emergency response plans for accidents, and equipment inspection and maintenance schedules. 2. Equipment Maintenance Management System: Establish an equipment maintenance management system, clarifying the maintenance responsibilities and plans for the equipment. This includes regular equipment inspections, maintenance, and repairs to ensure the normal and safe operation of the equipment. 3. Equipment Operation Management System: Establish an equipment operation management system, clarifying the operation procedures and requirements for the equipment. This includes startup, shutdown, adjustment, and monitoring procedures to ensure the safety and operation of the equipment. 4. Equipment Incident Management System: Establish an equipment incident management system, clarifying the reporting, investigation, and handling procedures for incidents. This includes reporting requirements for equipment incidents, accountability, cause analysis, and improvement measures to reduce incident occurrence and minimize loss. 5. Equipment Training and Assessment System: Establish a training and assessment system for equipment operators to ensure they possess the necessary skills and knowledge. This includes equipment operation training, safety training, and technical training, along with regular assessments and evaluations of operators. 6. Equipment Inventory and Record Management System: Establish an equipment inventory and record management system, recording the operation status, maintenance records, and incident records of the equipment. This includes equipment inventory management, completion and preservation of maintenance records, and organization and analysis of incident records for equipment management and issue traceability. The above are some basic contents of the management system for incidents related to gas thermal oil heater equipment. Specific management systems need to be formulated and improved based on actual conditions. At the same time, relevant laws and regulations and standards must be followed to ensure the safety and environmental performance of the equipment.

When selecting a steam boiler, several key factors should be taken into account: - Steam Demand: First, determine the steam requirements of the factory or project, including steam pressure, flow rate, and quality. Choose the appropriate boiler model and specifications based on actual needs to ensure they meet the process and production requirements. - Boiler Type: There are various types of steam boilers, such as fire-tube boilers, water-tube boilers, and gas boilers. Select the suitable boiler type based on the factory's actual conditions and needs. Also, consider the fuel type of the boiler, such as coal, gas, or biomass, and choose a fuel type that complies with the factory's energy supply and environmental protection requirements. - Boiler Efficiency: The efficiency of the boiler directly affects energy utilization efficiency and operating costs. Understand the thermal and combustion efficiency of the boiler and choose a high-efficiency steam boiler to reduce energy consumption and operating costs. - Quality and Reputation: Choose a supplier with a good reputation to ensure the quality and reliability of the steam boiler. Refer to customer reviews, industry certifications, and ratings to understand the supplier's reputation and product quality. - Technical Support and After-Sales Service: Select a supplier that provides comprehensive technical support and after-sales service. Ensure the supplier can offer installation guidance, training, maintenance, and troubleshooting support to ensure the normal operation and maintenance of the steam boiler. - Cost and Budget: Finally, select a steam boiler that fits within your budget and economic considerations. Consider the purchase cost, operating cost, and maintenance cost to choose a steam boiler with a high cost-performance ratio. It's important to note that the above factors are just some of the key considerations when purchasing a steam boiler. The specific choice should be determined based on the actual conditions and needs of the factory. It is recommended to communicate and compare with multiple suppliers to gather more information and advice for an informed decision.

The importance of energy-saving in steam boilers is significant for the following reasons: Energy Costs: Steam boilers typically use fuels (such as coal, gas, oil, etc.) to generate steam, with energy costs constituting a substantial part of the boiler's operating expenses. Energy-saving measures can reduce energy consumption and lower costs. Environmental Protection: The combustion process of steam boilers produces exhaust gases and particulate matter, contributing to environmental pollution. Energy-saving can decrease fuel usage and reduce emissions, positively impacting environmental protection. Sustainable Development: Energy-saving is a crucial aspect of sustainable development. By reducing energy consumption and extending the boiler's lifespan, resource consumption and waste can be minimized, promoting sustainable practices. To achieve energy-saving, the following measures can be taken: Improving Boiler Thermal Efficiency: Enhance the boiler's combustion system, optimize combustion parameters, and improve heat exchange efficiency to raise the boiler's thermal efficiency and minimize energy waste. Heat Recovery Utilization: Employ heat recovery systems to capture and utilize the excess heat from the flue gases emitted by the boiler, using it for heating water or other heat-intensive processes, thereby improving energy utilization. Application of Energy-Saving Equipment: Use energy-saving equipment like variable-frequency drives, energy-saving burners, and heat pumps to reduce energy consumption and enhance efficiency.

Selecting the right thermal oil heater requires considering the following aspects: - Thermal Load Demand: First, determine the required thermal load for the heater, i.e., the heat energy needed. Establish the rated power and thermal load range of the heater based on actual demand to ensure it can meet the required heat energy supply. - Operating Temperature and Pressure: The operating temperature and pressure range of the heater must match the actual application scenario. Choose the appropriate temperature and pressure range based on process requirements and working environment to ensure stable operation of the heater. - Thermal Oil Type: Select the appropriate type of thermal oil based on process requirements and working environment. Common thermal oils include silicone thermal oil, organic thermal oil, and mineral oil thermal oil, each with different operating temperature ranges and performance characteristics. Choose according to actual needs. - Equipment Quality and Reputation: Choose a supplier with a good reputation and quality thermal oil heaters. Ensure the manufacturing process and material quality of the heater are reliable, providing stable and reliable performance and after-sales service. - Safety and Environmental Protection: The safety and environmental protection of the heater are important considerations. Choose a heater with safety protection devices and environmental certifications to ensure safety for personnel and equipment during operation. - Economic and Energy Efficiency: Consider the economic and energy efficiency of the heater. Choose a heater with high energy efficiency and energy-saving features to reduce energy consumption and operating costs. Overall, considering these factors and selecting an appropriate thermal oil heater based on actual needs ensures stable operation of the equipment.
ZJ Special Equipment adheres to the grand vision of "realizing employees' dreams, creating value for customers, and striving for the prosperity and strength of our motherland," and is dedicated to the development of the green energy equipment industry. We commit to society with high-quality, cost-effective products and services!