Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boiler, deep-freeze containers, pressure vessels, central air conditioning, engineering installation, international trade, and the Internet of Things. It has three manufacturing sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total area of 200,000 square meters, with the main workshop spanning 83,000 square meters. Currently, it has 710 employees, including 247 engineering and technical staff and 82 middle-level technical personnel. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise of Shandong Province" by the Department of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise of Shandong Province" and in August 2022, as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
When using a gas thermal oil furnace, please note the following precautions: Safety Operation: A gas thermal oil furnace is a high-temperature device, and safety must be observed during operation. Operators should be familiar with the equipment's operating procedures and safety considerations, wear appropriate personal protective equipment, and ensure safe operation. Gas Supply: A stable gas supply is required for the gas thermal oil furnace. Before use, check if the gas pipeline is clear and the gas valve is open to ensure normal gas supply. Thermal Oil Circulation: The thermal oil furnace needs to circulate the thermal oil to the heat source equipment through a circulation pump. Before use, inspect the pump's operation to ensure proper functioning. Temperature Control: Gas thermal oil furnaces typically require a temperature control system to regulate the thermal oil's temperature. Before use, check the system's settings and adjustments to ensure accurate and reliable temperature control. Regular Maintenance: Gas thermal oil furnaces require regular maintenance and upkeep, including cleaning the burner, checking the sealing of pipes and valves, and replacing worn parts. Regular maintenance ensures the equipment operates properly and extends its lifespan. Environmental Protection: Gas thermal oil furnaces produce exhaust gases during combustion, so ensure proper exhaust emissions. Implement corresponding exhaust treatment measures, such as flue gas purification equipment, to minimize environmental impact. The above are some precautions for using a gas thermal oil furnace. To ensure safety and proper equipment operation, it is recommended to follow relevant operational procedures and safety requirements, and to conduct regular maintenance and inspections. If necessary, consult the manufacturer or engineer of the gas thermal oil furnace.

Yes, thermal oil boilers typically come with some self-protection features to ensure safe operation and extend their service life. Here are some common self-protection functions: Overheat Protection: Thermal oil boilers are equipped with overheat protection devices that automatically shut off the burner's gas supply when the thermal oil temperature exceeds the set safe range, preventing overheating of the thermal oil and avoiding equipment damage and safety accidents. Overpressure Protection: Thermal oil boilers also have overpressure protection devices that automatically shut off the burner's gas supply when the thermal oil pressure exceeds the set safe range, preventing explosions or leaks in the thermal oil system. Burner Automatic Control: The burners of thermal oil boilers are usually equipped with automatic control systems that can automatically adjust the gas supply and combustion effect based on set operating parameters, maintaining a stable combustion state and avoiding incomplete combustion or excessive combustion. Temperature Control and Adjustment: Thermal oil boilers are typically equipped with temperature control and adjustment devices that can automatically regulate the circulation and heating of the thermal oil based on the set operating temperature, maintaining a stable working temperature and avoiding excessive or low temperatures. Water Level Protection: For some thermal oil boilers, especially water tube boilers, water level protection devices are also installed to monitor the water level of the thermal oil and water. When the water level is abnormal, the protection device will automatically shut off the burner's gas supply, preventing dry burning and thermal oil leakage. It should be noted that although thermal oil boilers have self-protection features, they still require regular inspections and maintenance to ensure the normal operation and reliability of these protection devices. Additionally, operators need to understand and master the working principles and operation methods of these self-protection functions to ensure safe operation.

When designing a fuel-gas boiler room, the following points should be taken into consideration: Safety Considerations: Ensure the boiler room design complies with relevant safety standards and regulations. Address fire risks by installing appropriate firewalls, fire doors, and fire isolation facilities. Ensure good ventilation with suitable ventilation equipment and flue systems to expel harmful gases produced by combustion. Space and Layout: Plan the space and layout of the boiler room based on the number and size of the boilers. Ensure there is ample space for operation, maintenance, and cleaning. Arrange the boilers, fuel storage equipment, flue systems, and piping layout for ease of operation and maintenance. Fuel Supply and Storage: Consider the requirements for fuel supply and storage. Ensure the safety and reliability of fuel supply pipelines and equipment to prevent leaks and contamination. Plan the capacity and location of fuel storage equipment appropriately to ensure sufficient fuel supply and compliance with safety requirements. Emission and Exhaust Gas Treatment: Address the emissions and treatment of exhaust gases produced by combustion. Install suitable flue systems and exhaust gas treatment equipment to minimize the environmental impact of emissions. Ensure the design and layout of the flue system effectively expel smoke and exhaust gases. Control and Monitoring Systems: Design appropriate control and monitoring systems to ensure the safety and operation of the boilers. This includes monitoring and control equipment for parameters such as temperature, pressure, and flow, as well as alarm and automatic shutdown devices. Ensure operators can promptly understand the boiler's operating status and take necessary actions.

In textile processing factories, common types of boilers include the following: Steam Boilers: Steam boilers are one of the most commonly used types of boilers in textile processing plants. They produce high-pressure, high-temperature steam, which is used for heat treatment, dyeing, boiling, and other processes in textile manufacturing. Steam boilers offer advantages such as rapid heating, stability, and efficiency. Hot Water Boilers: Hot water boilers are suitable for low-temperature textile processing techniques like washing and drying. They provide a stable supply of hot water with high temperature control accuracy and low energy consumption. Hot Air Furnaces: Hot air furnaces are used for drying processes in textile manufacturing. They transfer heat energy to textiles through the hot air produced by combustion, achieving quick drying. Hot air furnaces have the benefits of fast heating and high thermal efficiency. When selecting the appropriate boiler type for a textile processing plant, consider the following factors: Processing Requirements: Determine the required heat medium (steam, hot water, hot air) and parameters such as working temperature and pressure based on the specific processing needs of the textile factory. Energy Costs and Efficiency: Consider the energy consumption and efficiency of different boiler types, choosing one that meets processing demands and has high energy utilization efficiency. Environmental Requirements: Pay attention to the emission standards and environmental performance of the boilers, selecting a type that meets environmental requirements. Maintenance
Shandong Zhongjie Special Equipment, welcome customers to visit our factory for business discussions.