Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Development Zone, Heze City, with a registered capital of 50 million yuan and total assets of 500 million yuan. The company has 7 business centers: boiler, deep-freezing vessel, pressure vessel, central air conditioning, engineering installation, international trade, and Internet of Things. It has three factory sites on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total of 200,000 square meters, with the main workshop spanning 83,000 square meters. It currently employs 710 people, including 247 engineers and technicians, and 82 intermediate-level technicians. In December 2016, it was recognized as a "High-tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
Industrial boiler thermal deaeration is a commonly used deaeration method, characterized by: - Deaeration: Thermal deaeration involves heating the boiler feed water to release dissolved oxygen from the water using heat. As the water temperature rises during the thermal deaeration process, the solubility of oxygen decreases, allowing for effective removal of oxygen from the water. - No Chemicals Required: Unlike other deaeration methods, thermal deaeration does not require the use of chemicals, thus avoiding environmental pollution and equipment corrosion caused by chemicals. It also reduces operating costs and complexity. - Automated Control: Thermal deaeration can be achieved through an automated control system, which adjusts the feed water temperature and flow rate based on the boiler's operating status and water quality to achieve optimal deaeration results. - Wide Application Range: Thermal deaeration is suitable for various types of industrial boilers, including coal-fired, gas-fired, and oil-fired boilers. Whether it's a small or large boiler, thermal deaeration can be used for deaeration treatment. - Boosts Boiler Efficiency: Removing dissolved oxygen from the water can reduce corrosion and oxidation reactions within the boiler, extending its lifespan. Additionally, reducing oxygen levels can improve the boiler's thermal efficiency and lower energy consumption. - Note: While thermal deaeration effectively removes oxygen from the water, it may not address other water quality issues such as hardness and alkalinity. Therefore, in practical applications, it is necessary to consider the water quality characteristics and boiler requirements to select an appropriate deaeration method.

When welding in thermal oil boilers, the following points should be noted: - Welder Qualification: Ensure that the welders involved in the welding process have the appropriate qualifications and experience, and are familiar with welding techniques and procedures. - Welding Material Selection: Choose welding materials suitable for thermal oil boilers, ensuring compatibility with the thermal oil and high-temperature resistance. - Welding Process Control: Select the appropriate welding process based on the material and design requirements of the thermal oil boiler, such as manual arc welding, gas shielded welding, etc. Control welding parameters such as current, voltage, and welding speed to ensure the quality and strength of the weld. - Welding Area Protection: During the welding process, the welding area must be protected to prevent contamination from the thermal oil and welding materials. Use welding barriers, welding shields, and other equipment to ensure the cleanliness and safety of the welding area. - Post-Welding Treatment: After welding, post-treatment of the welds is required, such as slag removal, grinding, and cleaning. Ensure the flatness and surface quality of the weld. - Welding Quality Inspection: Conduct welding quality inspections, including visual examination of the weld, dimensional measurement, and non-destructive testing, to ensure that the welding quality meets requirements. - Safety Measures: Pay attention to safety measures during the welding process, such as wearing protective eyewear, gloves, fire-resistant clothing, etc., to ensure the safety of welding operations. - It is important to follow relevant standards and specifications during the welding process to ensure welding quality and safety. If unsure about how to perform welding or if there are potential safety hazards, seek advice from a welding engineer or consult relevant agencies.

A gas heat transfer oil furnace is a device that uses gas as fuel to transfer heat energy through heat transfer oil. Its features include: - High thermal efficiency: The gas heat transfer oil furnace uses heat transfer oil as the heat conduction medium, offering a high heat transfer efficiency. The heat transfer oil has high thermal conductivity and stability, allowing for rapid heat transfer and improving energy utilization efficiency. - Temperature control: By controlling the gas supply and the circulation of heat transfer oil, the furnace can achieve precise temperature control. This control meets various process and production needs, enhancing production efficiency and product quality. - Safety and reliability: The furnace employs a closed-loop system, with combustion occurring in a sealed environment, reducing the risk of gas leakage. Additionally, the heat transfer oil has a high flash point and ignition point, making the combustion process relatively safe and reliable. - Flexibility: The gas heat transfer oil furnace is suitable for various industrial sectors, such as chemicals, textiles, and food processing. It can adapt to different process requirements and working conditions, offering strong flexibility. - Environmental protection and energy-saving: The gas heat transfer oil furnace emits relatively low amounts of exhaust during combustion, causing minimal environmental pollution. Due to its high thermal efficiency and temperature control, the furnace can save energy consumption and reduce energy costs. - It is important to note that regular inspection and maintenance are required for the gas heat transfer oil furnace during use to ensure proper operation and extend its service life. Additionally, selecting the appropriate model and supplier is crucial for ensuring its features and performance.

If a gas boiler gas leak is detected, immediate action is required to handle the situation: 1. Immediately shut off the gas supply: First, quickly close the gas supply valve to cut off the gas supply. This prevents further leakage and reduces safety risks. 2. Ventilate the area: Open windows and doors to ensure good indoor air circulation and expel any remaining gas. This lowers the indoor gas concentration, reducing the risk of explosion and poisoning. 3. Avoid open flames and electrical appliances: In the event of a gas leak, avoid using open flames and electrical devices to prevent fire or sparks that could cause an explosion. 4. Do not operate electrical switches: Do not operate electrical switches, including lights, TVs, computers, etc., to prevent sparks that could lead to an accident. 5. Contact the gas company or personnel: Promptly contact the local gas company or personnel to report the gas leak situation and request their inspection and repair. 6. Do not use a phone or make calls: Do not use a phone or make calls when a gas leak is suspected to avoid static electricity causing an explosion. 7. Keep away from the leak area: Keep a safe distance from the leak area to ensure personal safety. Do not approach the gas boiler or the leak point to avoid injury. Remember, handling a gas boiler gas leak is a dangerous task that requires caution. It is best handled by trained personnel to ensure safety.
Zhongjie Special Equipment adheres to the grand vision of "realizing employees' dreams, creating value for customers, and striving for the prosperity and strength of our motherland," focusing on the development of green energy equipment industry. We dedicate high-value products and services to society!