Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) was established in 2001, located at No. 2218 Jinnan Road, Economic and Technological Development Zone, Heze City. With a registered capital of 50 million yuan and total assets of 500 million yuan, the company has 7 business centers: boilers, deep-freezing containers, pressure vessels, central air conditioning, engineering installation, international trade, and the Internet of Things. It has three factory areas on Jinnan Road, East Changjiang Road, and Bohai Road, covering a total of 200,000 square meters. The main workshop is 83,000 square meters, with 710 employees, including 247 engineers and technicians, and 82 intermediate-level technical personnel. In December 2016, it was recognized as a "High-Tech Enterprise" by the Science and Technology Department. In June 2021, it was identified as a "Specialized and New Enterprise in Shandong Province" by the Ministry of Industry and Information Technology. In June 2022, it was recognized as a "Gazelle Enterprise in Shandong Province" and in August 2022, it was identified as a "Specialized and New Small Giant Enterprise" by the Ministry of Industry and Information Technology.
When using a thermal oil furnace with gas, the following points should be noted: - Safety Operation: A thermal oil furnace is a high-temperature equipment, and safety must be ensured during operation. Operators should be familiar with the equipment's operation procedures and safety precautions, wear necessary personal protective equipment, and ensure safe operation. - Gas Supply: A stable gas supply is required for a thermal oil furnace. Before use, check if the gas pipeline is clear, the gas valve is open, and ensure normal gas supply. - Thermal Oil Circulation: The thermal oil furnace needs to circulate the thermal oil to the heat source equipment through a circulating pump. Before use, check the operation of the circulating pump to ensure it is functioning properly. - Temperature Control: A thermal oil furnace typically requires a temperature control system to regulate the temperature of the thermal oil. Before use, check the settings and adjustments of the temperature control system to ensure accurate and reliable temperature control. - Regular Maintenance: Regular maintenance and maintenance are required for a thermal oil furnace, including cleaning the burner, checking the tightness of the pipes and valves, and replacing worn parts. Regular maintenance can ensure the normal operation of the equipment and extend its service life. - Environmental Protection: During combustion, a thermal oil furnace produces exhaust gas, and emissions must be ensured. Appropriate exhaust gas treatment measures, such as flue gas purification equipment, can be taken to reduce environmental impact. - The above are some points to note when using a thermal oil furnace with gas. To ensure safety and the normal operation of the equipment, it is recommended to follow relevant operational procedures and safety requirements, and to carry out regular maintenance and inspections. If necessary, consult the manufacturer or engineer of the thermal oil furnace for advice.

Industrial boiler thermal deaeration is a commonly used deaeration method, characterized by: - Deaeration: Thermal deaeration involves heating the boiler feed water to release dissolved oxygen from the water using heat. As the water temperature increases during the thermal deaeration process, the solubility of oxygen decreases, enabling the effective removal of oxygen from the water. - No Chemicals Required: Unlike other deaeration methods, thermal deaeration does not require chemicals, thus avoiding environmental pollution and equipment corrosion caused by chemicals. It also reduces operating costs and complexity. - Automated Control: Thermal deaeration can be achieved through automated control systems, which adjust the feed water temperature and flow rate based on the boiler's operating status and water quality to achieve optimal deaeration results. - Wide Application Range: Thermal deaeration is suitable for various types of industrial boilers, including coal-fired, gas-fired, and oil-fired boilers. Whether it's a small or large boiler, thermal deaeration can be used for deaeration treatment. - Improves Boiler Efficiency: Removing dissolved oxygen from the water can reduce corrosion and oxidation reactions within the boiler, extending its lifespan. Additionally, reducing the presence of oxygen can enhance the boiler's thermal efficiency and reduce energy consumption. - Note: While thermal deaeration effectively removes oxygen from the water, it may not address other water quality issues such as hardness and alkalinity, which may require alternative water treatment methods. Therefore, in practical applications, it's necessary to consider the water quality characteristics and boiler requirements to select the appropriate deaeration method.

To reduce the operational costs of gas-fired boilers, consider the following aspects: - Combustion System: Ensure the stability of the combustion system in the gas-fired boiler. Regularly inspect and maintain burners, clean nozzles and combustion chambers, adjust the ratio of gas and air to enhance combustion efficiency and reduce gas waste. - Energy-Saving Control System: Install and use energy-saving control systems, such as smart thermostats and timers. These systems can automatically adjust the boiler's operating status based on actual needs, avoiding unnecessary energy waste. - Regular Maintenance: Perform regular maintenance on gas-fired boilers, including cleaning heat exchangers, inspecting and replacing seals, and clearing gas pipelines. Maintain the boiler's normal operation to reduce energy loss and prevent malfunctions. - Heat Recovery Utilization: Consider installing heat recovery units such as waste heat recovery systems or flue gas heat exchangers. These devices can utilize the residual heat in the flue gas emitted from the gas-fired boiler to heat water or other equipment requiring heat, improving energy utilization efficiency. - Pipe Insulation and Leak Inspection: Ensure that the insulation performance of gas and hot water pipelines is good to reduce energy loss. Regularly check for leaks in the pipelines and repair them promptly to avoid energy waste and safety hazards. - Energy Management and Monitoring: Establish an effective energy management system to monitor and analyze the energy consumption of gas-fired boilers. Through data analysis and optimizing operating strategies, identify energy-saving potential and improvement directions. - Training and Awareness Enhancement: Provide staff training to strengthen their awareness of operating and maintaining gas-fired boilers. Enhanced knowledge and skills of employees contribute to better management and operation of the boilers, reducing operational costs. By considering these factors comprehensively, you can effectively reduce the operation cost of gas-fired boilers.

When designing a fuel-gas boiler room, pay attention to the following aspects: Safety considerations: Ensure the design of the boiler room complies with relevant safety standards and regulations. Consider fire risks and set up appropriate firewalls, fire doors, and fire isolation facilities. Ensure good ventilation in the boiler room, and install suitable ventilation equipment and flue systems to expel harmful gases produced by combustion. Space and layout: Plan the space and layout of the boiler room based on the number and size of the boilers. Ensure there is sufficient space for operation, maintenance, and cleaning. Arrange the boilers, fuel storage equipment, flue systems, and pipeline layout in an orderly manner for ease of operation and maintenance. Fuel supply and storage: Consider the requirements for fuel supply and storage. Ensure the safety and reliability of fuel supply pipelines and equipment, avoiding leaks and contamination. Plan the capacity and location of fuel storage equipment reasonably to ensure an adequate fuel supply and compliance with relevant safety requirements. Emission and exhaust gas treatment: Consider the emission and treatment of exhaust gases produced by combustion. Set up appropriate flue systems and flue gas treatment equipment to minimize the impact of exhaust emissions on the environment. Ensure the design and layout of the flue system are reasonable and can effectively expel flue gases and exhaust. Control and monitoring systems: Design suitable control and monitoring systems to ensure the safety and operation of the boiler. This includes monitoring and control equipment for parameters such as temperature, pressure, and flow, as well as alarm and automatic shutdown devices. Ensure operators can timely understand the operating status of the boiler and take appropriate actions.
Chongjie Special Equipment upholds the grand vision of "realizing employees' dreams, creating value for customers, and striving for the prosperity and strength of our motherland," and is dedicated to the development of the green energy equipment industry. We offer the society products and services with high cost-performance!