Shandong Zhongjie Special Equipment (formerly Heze Boiler Factory Co., Ltd.) holds an A-grade boiler manufacturing license, an A2-grade pressure vessel manufacturing license, an A2-grade pressure vessel design license, a B-grade boiler installation license, and GB2/Class and GC2/Class pressure pipeline installation licenses, as well as an electromechanical equipment installation contracting qualification. It is a member of the China Boiler and Water Treatment Association, the China Chemical Equipment Association, and the理事 unit of the Shandong Equipment Manufacturing Association. The company has also passed certifications for the ISO9001 Quality Management System, ISO14001 Environmental Management System, OHSAS18001 Occupational Health and Safety Management System, and the American ASME/U2 certification.
For maintenance of CO2 storage tanks, here are some recommended methods: - Regular Inspections: Conduct periodic checks of the tank's exterior and interior for corrosion, cracks, leaks, etc. Non-destructive testing methods, such as ultrasonic testing, can be used to assess tank integrity. - Cleaning and Corrosion Prevention: Regularly clean the tank's exterior to remove dirt and debris. For tanks coated with corrosion-resistant paint, regularly inspect the coating's condition and repair or recoat as needed to protect against corrosion. - Leak Detection: Perform regular leak detection to ensure there are no leaks. Use gas detectors or leak detectors, or conduct pressure tests to evaluate the tank's sealing performance. - Safety Valve Inspection: Regularly check and test the operational status of safety valves to ensure they function properly under overpressure conditions. Adjust and test according to the specifications and requirements of the safety valves. - Pipe and Valve Maintenance: Regularly inspect and maintain the pipes and valves connected to the tank to ensure proper operation and sealing performance. Clean and lubricate valves, check for leaks at pipe connections. - Record and Documentation: Record the dates, contents, and results of maintenance, establishing maintenance records for the tank. Retain relevant documents and reports for future reference and review. - Note: For maintenance of CO2 storage tanks, it is recommended to follow relevant safety operating procedures and standards. If you lack the necessary knowledge and experience, consult personnel or manufacturers for maintenance work.

Routine inspections and maintenance of CO2 storage tanks can be conducted following these steps: - External Inspection: Check for any visible damage, corrosion, or oil leakage on the tank's exterior. Pay attention to any abnormalities in the tank shell, valves, and pipe connections. - Internal Inspection: If access to the interior is permitted, conduct an internal inspection. Check for corrosion, scaling, or blockages in the lining, valves, and pipes. - Valve and Pipe Inspection: Verify that the tank's inlet and outlet valves and pipe connections are functioning normally, with no leaks or loose fittings. Ensure valves operate smoothly and reliably. - Pressure Relief Device Inspection: Check that the tank's pressure relief devices (such as safety valves) are operating correctly. Confirm that the set pressure of the relief devices meets requirements. - Measurement and Control System Inspection: Ensure the tank's level, pressure, and temperature measurement and control systems are functioning properly. Calibrate and test the accuracy of measuring equipment. - Cleaning and Draining: Regularly clean the interior of the tank, removing accumulated impurities and sediments. Also, periodically drain the tank to remove liquid and gas impurities. - Maintenance and Repair: Perform necessary maintenance and repair work based on inspection results. Repair damaged components, replace worn-out seals, etc., to ensure the tank operates normally. - Documentation and Reporting: Document the inspection and maintenance process, including the date of inspection, contents of the inspection, identified issues, and measures taken. Submit inspection reports to relevant departments or management as needed. These are general steps for routine inspections and maintenance of CO2 storage tanks. Specific operations should be tailored to the tank's characteristics and requirements. When conducting inspections and maintenance, follow relevant safety operating procedures and have personnel perform the operations.

Low Temperature Carbon Dioxide Storage Tank Related Knowledge 1. Structure of Low Temperature Carbon Dioxide Storage Tank The low temperature carbon dioxide storage tank typically features a double-layered cylindrical structure. The inner cylinder is made of 6MnDR alloy steel, while the outer cylinder is constructed from Q245R or Q345R pressure vessel steel plate. The piping is made of austenitic stainless steel, and the insulation space is filled with high-vacuum sintered sand or layered with insulation material. The storage tank is equipped with valves for operation, which are arranged for ease of use. Pressure gauges and level indicators are also installed to monitor the internal pressure and liquid level of the low temperature carbon dioxide storage tank. 2. Key Features of Low Temperature Carbon Dioxide Storage Tank (1) The storage tank is equipped with a liquid filling connection for tanker trucks, allowing for liquid supply to vaporizers, tanker trucks, and pumps. (2) Both the inner and outer cylinders of the storage tank are equipped with safety devices to ensure safe operation for users. (3) The insulation material of the low temperature carbon dioxide storage tank has been specially treated to provide a longer vacuum lifespan. Additionally, the tank is fitted with a vacuum gauge for measuring the insulation space's vacuum level when necessary. 3. Transportation of Low Temperature Carbon Dioxide Storage Tank (1) During road transportation, the storage tank should be securely fastened to the vehicle, travel at moderate speeds, and avoid collisions with other objects. (2) After arrival, the unloading crew should work with the equipment supervisor to develop a scientific and reasonable unloading plan. 4. Installation of Low Temperature Carbon Dioxide Storage Tank (1) Upon arrival at the installation site, the storage tank can be positioned when installation conditions are met. During the installation process, avoid impacts and strikes, and pay special attention to the explosion-proof equipment on the outer cylinder and the vacuum valve, which should not be touched. (2) Perform a gas-tightness test on the inner cylinder system using nitrogen to the working pressure. After confirming that valves, pipes, flanges, etc., have no leaks, the installation is complete. (3) The installation dimensions of the low temperature carbon dioxide storage tank are specified in the supply materials. When considering liquid filling and emptying with tanker trucks, account for the vehicle's travel path.

Urea synthesis from carbon dioxide is a significant chemical reaction with several applications: Urea Production: Urea is a vital nitrogen fertilizer and chemical, widely used in both agricultural and industrial sectors. The synthesis of urea from carbon dioxide is one of the commonly used methods for urea production. In this process, carbon dioxide reacts under high temperature and pressure to produce urea. This method utilizes carbon dioxide resources, reducing reliance on fossil fuels used in traditional urea production methods. Urea Fuel: Urea can also serve as a urea fuel for internal combustion engines and combustion equipment. By heating and decomposing urea, energy is released, which then reacts with oxygen in the air to produce combustion heat. This combustion process only yields water vapor and nitrogen as byproducts, minimizing environmental pollution. Chemical Synthesis: Urea is an essential raw material for the synthesis of many chemicals. The synthesis of urea from carbon dioxide provides a sustainable supply of urea for the chemical industry, used to produce other chemicals like plastics, resins, paints, etc. Energy Storage: Urea can also act as a medium for energy storage. By synthesizing urea from carbon dioxide, energy can be stored in the form of chemical bonds. When energy is needed, it can be released by decomposing urea, which then reacts with oxygen in the air to produce combustion heat, releasing stored energy. The development of carbon dioxide synthesis technology for urea aims to reduce dependence on fossil fuels used in traditional urea production methods, lower greenhouse gas emissions, and promote the development of sustainable agriculture and the chemical industry. However, this technology is still under development and research, requiring further technological breakthroughs and practical verification to achieve large-scale application.
ZJ Special Equipment adheres to the grand vision of "realizing employee dreams, creating customer value, and striving for the prosperity and strength of our motherland," and is dedicated to the development of the green energy equipment industry. We commit to society with high-quality products and services at competitive prices!