YBS-DQ Intelligent Pressure Calibration Instrument
Overview
YBS-DQPrecision Digital Pressure Gauge is a self-contained pressure source calibration instrument with pressure detection and DC24VPower output, mainly used for verifying pressure (differential pressure) transmitters, general (precision) pressure gauges, and other pressure instruments, convenient for use.
Product Features
●Specialized metal housing, sturdy and shock-resistant.
Manual pressure creation95kPa~2MPa。
● Pressure source components are finely ground, with good airtightness, compliant withIP54Sealing Standards.
● Volumetric micro-regulator, easily achieves set-point pressure.
● Pressure/Vacuum switch selection, simple and convenient switching.
Backlit feature for continued task completion in low-light conditions.
● Pressure, Current/Voltage Measurement, Equipped withDC24VLoop power supply, on-site testing, one meter is all it takes.
Technical Specifications
Terms of Use: Power Supply: ExternalAC220V、50Hz
Built-in:6VNickel Hydride (Lithium-ion) Battery
Temperature:20±20)℃ (Accuracy may decrease beyond temperature range)
Humidity:0~80）%RH
Environment: Dust-free, non-corrosive gases
Pressure Interface: External SensorM20×1.5
Sensor built-in:M10×1.0Quick fit or Φ6Interrupt
Subject to customer's requirements for customization
■ Measurement Range, Resolution, Accuracy
Project | Measurement Range | Resolution | Accuracy |
Pressure | ±4kPa、±10kPa、±25kPa、±60kPa、±100kPa、-100～250kPa、0～600kPa、0～1.0kPa、0～1.6kPa、0～2.0kPa、 | Min 1Pa | 0.05%F·S、 0.1%F·S
|
Current | 0～22Ma | 1μA | 0.02%F·S |
Voltage | 0～10V | 1mV | 0.02%F·S |
Note: External pressure module, range expandable to60MpaTo be used with an external pressure source.
