Insulating (Frost-Proof) Magnetic Float Level GaugeFeatures:
The level gauge is constructed by installing an insulated jacket on the base model's body, allowing the introduction of steam and other heat transfer mediums. It can maintain the temperature inside the body.
Normal fluid flow. Thus, it is suitable for level measurement and control of fluids that are prone to solidification. For low-boiling point fluids, cold media such as cold water can be introduced to ensure stable level readings. This ensures the instrument accurately indicates the measured fluid level.
Detailed Description
Basic Parameters
Medium Viscosity: ≤0.15 Pa.S
UDZ Series Level Gauge Selection Chart
Table 1
Model | Base Model | Insulation type | Insertable | Corrosion-resistant | Anti-frost | Insulating and Corrosion-Resistant | Insert corrosion-resistant |
Code | 0 | W | D | J | S | Z | Y |
Table 2
Alarm Control | No alarm | With Limit (a) | With a Lower Limit (b) | With upper and lower limits |
Code | 0 | 1 (Explosion-proof C) | 2 (Explosion-proof D) | 3 (Explosion-proof e) |
Table 3
Material | Stainless Steel | Corrosion-resistant aluminum | Titanium | PVC Plastic | Fluoroplastic Packaging |
Code | P | L | T | S | F |
Table 4
Material | Stainless Steel | Rust-proof aluminum | Titanium | PVC Plastic | Lined with PTFE | Lining Acrylic | Lining Ethylene |
Code | p | L | T | S | PF | PP | PE |
Table 5
Nominal Pressure | MPa | Kgf/cm2 | |||||||||
0.6 | 1.0 | 1.6 | 2.5 | 4.0 | 6.3 | 10 | 16 | 220 | 320 | ||
Code | Stainless Steel | A | B | C | D | E | F | G | H | I | J |
Carbon Steel | a | b | c | d | e | f | g | h | i | j | |
Flange Standard | HG20593-97 DN20(RF) | HG20595-97 (RF) DN20 | Dg15 | Dg15 | |||||||
Table 6
Medium Temperature | -40~0℃ | ≤80℃ | ≤100℃ | ≤150℃ | ≤300℃ | ≤3500℃ | ≤480℃ |
Code | A | B | C | D | E | F | G |
Table 7
Apply Pressure (Actual) | MPa | Kgf/cm2 | ||||||||
0.6 | 1.0 | 1.6 | 2.5 | 4.0 | 6.3 | 10 | 16 | 220 | 320 | |
Code | A | B | C | D | E | F | G | H | I | J |
