Purpose

LT-901C ModelDigital Display Cantilever Impact TesterPrimarily used for the determination of impact toughness of non-metallic materials such as rigid plastics, reinforced nylon, fiberglass, ceramics, cast stone, electrical insulating materials, etc.

Two.Digital Display Cantilever Impact TesterApplicable Standards: Meets the requirements of GB/T 1843 "Test Methods for Impact Test of Plastics on Cantilever Beam" and ISO 180 and other testing standards.

Section 3: Performance Features of the Cantilever Beam Impact Tester

1. Test results displayed in full digital format

2. Equipped with imported ball bearings, the pendulum process energy loss is reduced to a minimum.

3. Input width and thickness test conditions, automatically calculate impact strength

4. Utilizing a 2500P/R imported encoder for precise pendulum angle measurement

5. Equipped with safety guardrails, ensuring the safe conduct of the testing process

4. Cantilever Beam Impact Tester Technical Parameters

Impact Speed: 3.5 m/s

2. Pendulum Energy: 2.75J, 5.5J, 11J, 22J

3. Pendulum Angle: 150°

4. Center Distance: 335mm

5. Paddle Force Moment:

Pd 1=0.53590Nm

Pd 2.75=1.47372Nm

Pd 5.5=2.94744Nm

Pd11=5.8949Nm

6. Distance from the cutting edge to the jaw: 22 ± 0.2mm

7. Blade Edge Radius: R=0.8mm ±0.2mm

Power: AC220V/ 50Hz

9. Dimensions: approximately 550mm x 300mm x 900mm

10. Net Weight: Approximately 145 Kg