Electricity Son Ten Available Try Inspection Machine

Product Model:LT-830

Product Description:

Servo-controlled material testing machines are suitable for testing the mechanical properties of metals and non-metals, including tensile, compressive, bending, shearing, tearing, peeling, piercing, etc. They also offer automatic control tests for constant-speed loading, constant-speed deformation, and constant-speed displacement, and have functions for low-cycle loading, deformation, and displacement cycles. They are used to determine elongation, tensile strength, bending modulus, elastic modulus, yield strength,Net Energy, Reflected Energy, Total EnergyPlease wait for instructions.Please provide the Chinese content you would like translated into American English..。

HarvestPlease provide the Chinese content you would like translated into American English.PCPerform data processing and analysis; test results can be automatically saved. After the test, the test curve can be retrieved again, allowing for the reproduction of the test process through the curve, or for curve comparison and magnification.。Windows、visitThe trial software under the platform boasts robust data and graphic processing capabilities.， Prints out complete test reports and curves immediately.

Meets Standards:

 GB/T16491-1996 Electrical Universal Testing Machine      

In-built operating softwareGaiGB、ISO、ASTMA variety of standardsPlease provide the Chinese content to be translated into American English.200Pieces, including those proposed by the customerNo content provided for translation.ISO34、 ISO 37、ISO 178、ISO 527 。

This unit is capable of producing curve types:荷花HeavyV.S.Please provide the Chinese content to be translated.Remove               HoeHeavilyV.S.Time

Please provide the Chinese content that needs to be translated into American English.MoveV.S.Please provide the Chinese content to be translated.Please provide the Chinese content that needs to be translated into American English.               ShouldPowerV.S.ShouldChange         

HohaiPlease provide the Chinese content you would like translated into American English.V.S.Two points extension

Key Technical Parameters:

◆Measurement Parameters

1.                      ZUILarge testing force：200kN；

2.                      Accuracy Grade：0.5Grade

3.                      Test Force Measurement Range：0.2%～1 Lingling %F.S；

4.                      Test Force Indication Error: Indicated ValueThe±0.3%Within

5.                      Power Resolution：1/500000；

6.                      Displacement Indication Error: IndicationPlease provide the Chinese content you would like to have translated into American English.±0.5%Within

7.                      Displacement Resolution：0.04μm；

8.                      Deformation measurement range：0.4%～100%F.S；

9.                      Deformed Indication Relative Error: IndicationThe±0.5%Within

10.                      Large Deformation Measurement Range：10～800mm；

11.                      Large deformation indication error: IndicationNo Chinese content provided.±0.5%Within;

12.                      High-resolution deformation measurement：0.008mm；

13.                      Small deformation resolutionRate:1/500000；

14.                      Small deformation accuracy:0.3%

◆Control Parameters

1.                      Stress control rate range：0.005～5%FS/s；

2.                      Stress control rate accuracy:

Speed＜0.05%FS/sAt that time, to the set valueThe±1%Within

QuickRate≥0.05%FS/sAt that time, set to the designated valueNo Chinese content provided.±0.5%Within;

3.                      Rate of variation control range：0.005～5%FS/s；

4.                      Stress Control Rate Precision:

Speed＜0.05%FS/sAt that time, set to the valueThe±1%Within

QuickRate≥0.05%FS/sAt the time, for the set valueThe±0.5%Within;

5.                      Positioning control speed range：0.001～250mm/min；

6.                      Positioning Control Rate Accuracy: Set ValueThe±0.2%Within

7.                      Positioning Closed-Loop Relative Accuracy:        0.1%

8.                              Force closed-loop accuracy:        0.2%Please provide the Chinese content to be translated.Please provide the Chinese content to be translated. + 0.0001FS(Sensor Full Scale)

9.                              Force closed-loop range:        -0.025FS/S Please provide the Chinese content to be translated. +0.025FS/S （FS:Sensor Full Scale Range

◆ Host specifications

1.                      Speed Range：0.001－250mm/min(Special test speed can also be customized to meet customer requirements)；

2.                      WalkingEffectiveSpace:1300mm(Without holders, special test spaces can also be customized according to customer requirements)； 

3.                      Utilize electricitySource:∮220V50HZ； 

4.                      Power: Approximately3600W； 

5.                      Machine unit sizeNo Chinese content provided for translation.:Approx.1140*680*1850mm(Long×Wide×High)

6.                      Machine weightQuantity:About700kg

Host specifications:

A.       High-precision sensor：0-200kNPower PrecisionIn±0.3 %Within.

B.       Volume Segments：Full seven gears：× 1，× 2，× 5，× 10，× 20，× 50，× 100；

Utilizing high precisionDegree24 bits A/DSample frequencyRate200Hz  Full-force analysisDegree 1/500000。

C.       Power systemUnified:Panasonic Servo MotorMachine+Panasonic servo drive + ball screw + linear bearing + synchronous belt drive. (Enables the machine beam to perform vertical linear motion.)

D.Control SystemUnified:Please provide the Chinese content to be translated into American English.Please provide the Chinese content to be translated.Pulse CommandControl method for more precise control
Speed Control RangeWreath0.001~250 mm/min。
The Zhonglian board features quick coarse adjustment and slow fine adjustment capabilities.
Automatically returns to the original point and stores data after testing.
E.Data Transmission Method:USBTransmission
F.Display SideStyle:UTM107+Win7/10Test software computer screen display.
G.A compact full-range one-speed and precise full-range seven-speed force linear dual correction system.
H.Luxury test interface software features control modes such as set speed, set displacement, set load (with adjustable hold time), set load increase rate, set stress increase rate, and set strain increase rate, plus multi-stage control modes to meet various testing requirements.
I.Test EmptyBetween:Test width approximately540 mmStandard Specifications
Laminated boardUp and downSpace1300 mm(Without Clamps) (Standard Specifications)
J.All-inclusiveMove:CodeApparatus2500 P/RPlease provide the Chinese content to be translated.Ascending4Double precision
HarvestPlease provide the Chinese content to be translated.LINE DRIVEEncoder anti-interference capability
Displacement SolutionAnalyze0.001mm。
Minor Deformation: Metal Extensometer, UnspecifiedAnalyze0.001mm
K.Safety PackagingPlease provide the Chinese content you would like to be translated into American English.:Overload emergency stop device, upper and lower travel limit device,
Leakage automatic shutdown system, automatic breakpoint shutdown feature.

Testable Items：
(1) Standard Test Items: (Standard Display Values and Calculated Values)
●Stretched shouldPower    ●Tensile strength
●Break off robustlyDegree    ●Tensile elongation break
●Determine the extension.Power    ●Tensile elongation at specified stress
●Determined stressValue    ●Tear Strength
●Any point forceValue    ●Any point elongation
●ExtrudePower     ●Adhesion and peak value calculation
●Pressure TestInspection    ●Adhesion Peel Strength Test
●Bend TestInspection    ●Puncture Force Test
(II) Special Test Items:
1.Elasticity coefficient, also known as the Elastic Young's Modulus
Definition: The ratio of the normal stress component with the same phase as the normal strain. This value is used as a coefficient to determine the material's rigidity; the higher the value, the more resilient the material.
2.Example Limit: The load within a certain range is directly proportional to the elongation, with the maximum stress being the proportional limit.
3.Elastic limit: The maximum stress that the material can withstand without undergoing significant deformation.
4.Elastic deformation: After the load is removed, the material's deformation disappears.
5.Deformation: Residual deformation remains in the material after the load is removed.
6.Yield Point: The point at which the material elongates with an increased rate of deformation without a change in stress is known as the yield point. The yield point is categorized into upper and lower yield points, typically with the upper yield point being considered as the yield point.
Yield（yieldThe load decreases abruptly once the load exceeds the proportional limit and no longer elongates proportionally. Subsequently, there is a period of fluctuation up and down, with significant changes in elongation, which is referred to as yielding.
7.Yield Strength: The load at which the elongation reaches a specified value during tensile testing, divided by the original cross-sectional area of the parallel section.
8.ElasticSpringKValue: The ratio of the force component in phase with deformation to the deformation.
9.Effective elasticity and lag loss:
On a tensile testing machine, the percentage of the ratio between the work recovered during the contraction of the sample and the work consumed during the elongation, when the sample is stretched at a certain speed to a certain elongation or to the specified load, is the effective elasticity. The percentage of the ratio between the energy lost during the elongation and contraction of the sample and the work consumed during the elongation is the hysteresis loss.

Detailed Description of Equipment Performance Features

1.Host System

1.1 Applicable for various material mechanical testsClamping fixture

1.2High precisionLoad MeasurementSensor(Transmitting Force)

1）Please provide the Chinese content you would like translated into American English.Degree0.3Grade；

2The innovative design of the structure is minimally affected by lateral loads, asymmetric loads, bending, and torsional moments.

3）150%No deformation under overload (no mechanical damage)High-precision sensor with excellent stability and strong lateral impact resistance.

Sensor Technical Specifications:

MODEL:DBSL-20T

RATED OUTPUT:3.00560

EXCITATION:10VDC/AC

THERMAL SENSE COEFF:≤0.003%F.S./°C    

THERMAL ZERO COEFF:≤0.003%F.S./°C      

INSULATION RESISTANCE:≥5000MΩ（50V DC）

SAFE OVERLOAD:150%F.S.

ZERO BALANCE(mV/V):-0.00130

NonLINEARITY(%R.C.):＜0.030

HYSTERESIS(%R.C.):＜0.030

INPUT IMPEDANCE (ohms)：390.00

OUTPUT IMPEDANCE(ohms)：350.00

1.3Precise servo drive systemPanasonic (Japan)

Electrical universal testing machine utilizesImported BrandsServo Motorand serverAs a power source, synchronous belts and reducersInstitution、High precision ball bearingsBall screwPendingAs an executing component, it achieves the movement of the testing machine's cross beam.Up and down linear motionSmooth transmission、Low noise feature。

1.4 Ball Screw (Taiwan Hiwin)

1.5 Convenient manual control

Manual control boxes can conveniently adjust the test space and complete tests via shortcut keys.

Software Features IntroductionShao:

The testing and control system for the universal testing machine is specifically designed for microcomputer electronic universal testing machines, microcomputer hydraulic universal testing machines, and microcomputer press machines. It can perform tensile, compressive, bending, shearing, tearing, and peeling tests.Please provide the Chinese content to be translated.PCData collection, storage, processing, and transmission via machines and interface boardsPrinted Test results. Calculates parameters such as maximum force, yield force, average peel force, maximum deformation, yield point, and elastic modulus; supports curve processing, multi-sensor integration, graphical interface, and flexible data handling.、MS-ACCESS 2003Database support enhances the system's functionality.

  M223CHarvestPlease provide the Chinese content that needs to be translated into American English.Visual Studio .NetDevelopment, SupportHoldWindows XP/Win7 Waiting for OS;

Support9Please provide the Chinese content you would like translated.:Simplified Chinese, Traditional Chinese, English, Spanish, Russian, Japanese, French, German, PortuguesePlease provide the Chinese content to be translated into American English.,Switch freely; the display names of the database fields for test data automatically translate according to the selected text, facilitating easy browsing in local languages, and basically meets the usage of testing machines worldwide.

Please provide the Chinese content to be translated.Hold3Variety types：SIInternational Standard Units、kg-cmUnit、Lb-InchBritish Imperial Units，6System of Units：N-mm-MPa、kN-mm-MPa、gf-cm-kgf/cm2、kgf-cm-kgf/cm2、Lb-Inch-kpsi、kP-Inch-kpsi,Unit switching is convenient. Meets the usage standards of various regions.

A.Test Standard Modular FunctionAvailable:Provide the required applications for user settings testing

Standard Setting, Scope CoveredGaiGB、ASTM、DIN、JIS、BS…Waiting. Test standards and specifications.

B.Sample materialsMaterial:Provide users with the ability to set all sample data, one-time entry

Data can be reused. Formulas can be self-modified to enhance the relevance of test data.

C.Double reporting systemCompilation:Open user-editable reports for testers to select from

Preferred report format (newly added in test program)EstablishEXCELReports

The editing function expands the previous pattern of single professional reports.

D.All length, force units, and display digits are dynamically interchanged.PositionT、Kg、N、KN、g、lbPart NumberPlease provide the Chinese content to be translated.mm、cm、inch。

E.Graphical curve scale automatically optimalPlease provide the Chinese content to be translated into American English.(Auto Scale)Enables graphics to

Superior scale display. Can switch to real-time graphic dynamics during testing.

Available with荷花Please provide the Chinese content to be translated.-Displacement, LoadPlease provide the Chinese content to be translated.-Time, positionMove-Time, shouldPower-Adaptive

HaniHeavily-2Click on the expanded diagram, as well as the multi-curve comparison.

F.Test results availablePlease provide the Chinese content to be translated into American English.EXCELNumber of formats

As per form output.

G.Test completion enables automatic archiving and manual archiving. Upon completion, the system automatically calculates the maximum force, tensile strength, yield strength (upper and lower), hysteresis loop method, incremental approach method, non-proportional extension strength, tensile strength, compressive strength, specific point elongation strength, specific point load elongation, elastic modulus, elongation, maximum, minimum, and average peel values, net energy, return energy, total energy, bending modulus, and fracture point.MovexPercent Load, Breaking LoadHeavyXPercent displacement, etc.

Data Backup: Test data can be stored on any hard drive partition.

H.Language: Simplified Chinese.

I.The software features a historical test data demonstration function.

(Initial Test Interface)

(Results Interface)

(Testing Report Interface)

Product Product Matched Please provide the Chinese content to be translated. Please provide the Chinese content you would like translated into American English. Single

Technical equipment documentation and files

1 DescriptionBook(TextHere is the translation: - 本 (Běn) -> "This"\One each for electronicsA piece)；

2 Provide main accessories listSingle(Please provide the Chinese content you would like translated into American English.Here is the translation for the provided Chinese text: - 本 (No Chinese content provided, so the word remains unchanged.)\One each for electronicsPiece)；

4 One set of packing list and a certificate of conformity.

Product Quality Assurance and After-Sales Service

1.Party B is responsible for providing the design plans for the equipment foundation, gas source, and power distribution, while Party A will implement and complete the manufacturing.

2.During the installation and debugging process of the equipment by Party A, technical support provided by Party B, with designated personnel assigned for guidance.

3.The entire unit of the equipment comes with a one-year warranty (starting from the completion of stability acceptance), and lifetime maintenance services are provided. During the warranty period, the supplier will offer free repair and replacement for all faults and damaged parts within the warranty scope.Please provide the Chinese content to be translated into American English..If damage is caused by human error, improper operation, voltage fluctuations, high-frequency impacts, or collision with foreign objects, the supplier also offers repair services, but charges for the cost.

4.Provide detailed lists of product consumables, offering spare parts year-round.

5.Warranty for Repair: Upon receiving the notice (via phone call) from the buyer regarding quality issues2Promptly provide a telephone or written response within hours to confirm the cause of the issue and guide the customer's technical staff in troubleshooting.Obstacle.Unresolvable, the supplier in24Within hours, dispatch professional technicians to the site for technical support.

Safety Matters

1Mechanical products strictly comply with national labor safety regulations.All.HealthLife.EliminatedAnti-.RingPlease provide the Chinese content to be translated into American English..Standard manufacturing.

Meets: WorkIndustry.Corporate Operation Safety Regulations, Environmental Protection: WorkIndustry.Corporate Noise Operation Standards

2DANGER: Equipment is operating in a hazardous condition.Status,Emergency stop control device to prevent hazardous occurrences.

3Equipment should have clear safety warnings.Please provide the Chinese content to be translated.,Emergency Stop Indicator.

FourHighTechnical Parameters of Low-Temperature Refrigeration Control System:

1、Temperature Range：-40~150℃； 

2、Volatility：≤±1.0℃； 

3、Temperature Gradient：≤±1.5℃

4、Temperature Control Range: Customized to Customer's Requirement，Min.-40℃~Max.150℃

5、Control Method：P.I.D.Automatic Temperature Calculation

6、Humidity Range：20%RH~98%RH

7、Control stability：±2.5%RH，±1℃

8、Even distribution：±3%RH，±1℃ 

9、Heating Method: Hot Air Circulation Heating

10、Cooling Compressor: Refrigeration Compression

11、Cooling speed：>1℃/Min

12、Timer：LED,0~9999Please provide the Chinese content to be translated into American English.99Please provide the Chinese content you would like translated into American English.

13、Inner Box Material：SUS#304Mirror-polished stainless steel sheet

14、Inner box dimensions：(L×W×H)35×35×60cm(Available for customizationManufacturing)

15、Outer Box Material: Sand-textured stainless steel plate, tensile machine with aluminum profile double columns, high-grade baked paint (considering long-term use, currently selecting stainless steel material)

16、Insulation: High-density rigidQualityPUFoam adhesivePlease provide the Chinese content to be translated.24KGlassCotton 

17、High and low temperature tensile testing machine safety device:
18、Travel Protection: Dual protection for machinery and computers, preventing overtravel beyond the preset limit
19、Range Protection: Can be system set
20、Emergency Stop Device: Handles sudden emergencies
21、Over-temperature Preventer: Protects the test item and the test chamber body
22、High-speed circuit protector: Protects heating circuits
23、ElectricMachine(BlowerMachine,FrozenMachine)Overload thermal relayVessel(Protect blowers and refrigeration units from overloadingHani)
24、Chiller Refrigerant High Pressure Protection Switch: Protects the compressor and extends its service life
25、Circuit Breaker Protectors: Protect Compressors, Extend Service Life
26、Overload Protection Switch for Compressor, Overhigh Temperature Overload Protection Switch, Water Shortage Protection Device

27、Overall dimensions of the unit：1140*680*1850（mmNo high and low temperature test chamber included.

High and low temperature test chamber exterior dimensions：1140*1900*1850（mm）.

High and Low Temperature Test Chamber Configuration List