Oil Seal Rotation Performance Tester

Features and Uses

LT-8000 High Temperature and High PressureOil Seal Rotation Performance TesterSuitable for testing and research on the sealing performance of various rotating oil seals. The oil seals are installed on the test machine, where two seals can be tested at a time. The main shaft rotates at a certain speed, and after running for a certain period, leakage is observed. The test shaft can rotate forward and backward. The advancement and retreat of the test chamber are driven by a motor. An oil pump is used to add oil to the test chamber, with the pressure within the test chamber provided by the oil pump. Pressure adjustment is manual via a relief valve, and the pressure is directly displayed on a pressure gauge. A touch screen controls the motor speed, oil pump pressure, test temperature, and running time, etc.

Parameters. This machine features a novel design, high level of automation, reasonable structure, excellent startup performance, ease of operation, wide speed range, low noise, and is the ideal choice for testing oil seal sealing performance.

2. Technical Specifications

2.1 Spindle Speed: Variable speed from 0 to 6000 rpm (or customizable to 24000 rpm upon customer request)

2.2 Spindle Runout Error: Less than +0.03mm

2.3 Offset Adjustment Range: 0~5mm

2.4 Testable Oil Seal Axle Hole Range: φ7~300mm

2.5 Pressure Range: 0~0.6 MPa

2.6 Temperature Range: Room temperature ~ 180℃

2.7 Total Power: 12 kW

(II) General Requirements for Equipment

A.

Design and production comply with the national standards of the People's Republic of China. Suitable for oil seal durability tests under conditions specified in GB/T 13871.4, GB/T 212834, or as required by relevant parties.

B. Machine Color

The unit is in an industrial grayish white color, but safety components (such as guardrails) are yellow (or red).

C. Dimensions

Host Size: 15001200x1000 (LxWxH); Electric cabinet size: 800550x1800(LxWxH); Stand Size: 1000500x1000 (Length x Width x Height))