The GD80Q fully automatic soft candy production line is a space-saving compact machine that requires only a space of (13m) long * (2m) wide for installation. It can produce up to 36,000 soft candies per hour, including the entire process of boiling, pouring, and cooling, making it ideal for small and medium-sized production operations.

Boiling System

The boiling pots and storage tanks are designed on the frame for easy operation and cleaning. The electric control cabinet controls the mixing, boiling, blending, and storage processes. The jacketed pot is used for dissolving raw materials, sugar, water, gel powder, etc. Place it in the pot, melt, boil, and then bring it to a certain temperature before transferring it to the storage tank via a pump to ensure continuous production. The pots and frames are made entirely of stainless steel. The jacketed pot can be electrically or steam-heated; the water tank is equipped with a heating rod, connected to the hot water tank through pipes, slightly lowering and maintaining the material temperature to ensure uniform liquid temperature. The syrup after boiling is then transported to the pouring machine via a pump.

Gating and Cooling Equipment

The casting machine includes a casting head, mold circuit, and cooling tunnel. The cooked syrup is stored in a casting hopper with insulation – for each casting. The candy is drawn into the main cylinder of the pump by the upward movement of the piston, then passes through a ball valve on the downward stroke. The mold circuit moves continuously, and the entire casting head reciprocates to follow its motion. All movements of the head are servo-driven – for precision and are mechanically connected to maintain consistency. The cooling tunnel is located behind the casting machine, with a discharge unit below the casting machine head. Unused sugar processing and cleaning are very convenient, and the candy generally needs to pass through the cooling tunnel. In both cases, when the candy exits the cooling tunnel, it is in a final solid state.

Quick-release mold

Molds are made of aluminum alloy and coated with Teflon or silicone, making them quick to disassemble and easy to clean.

Mold Shapes: Gummy Bear, Bullet, Cube

Gummy Weight: Ranges from 1g to 15g

Mold Material: Teflon Coated Mold