Product Details:
Rotating on wheel and non-rotating wheel with load transfer
Technical Specifications:
1 The testing machine is mainly composed of the main unit, parameter measurement and display unit, high-voltage control unit, and test accessories. 2 The main unit is manufactured using a casting structure, which allows for easy installation of specimens and non-rotating wheels. The torque applied is measured through the relationship between load and speed, significantly reducing the energy consumption of the test.
4. The 4-drive power uses a variable frequency speed-regulating motor to achieve stepless speed control, thereby propelling the load to rotate at high speed, exerting bending moments on the rotating shaft that act on the wheels. 5. During testing, it checks the bending of the main shaft in the testing process to enable the emergency stop function in case of wheel failure.
The 6 measurement control software boasts the following main features:
7 Test Parameters Set via Software:
8 Software displays test graphics, load values, etc.
9 Report Printing; File Management; Load Calibration:
10 Detailed Description as Follows:
10.1 Moment Closure Adjustment
10.2 Bending moment and displacement resonance circles displayed on the X-Y coordinate system of the 10.2 screen
10.3 Speed regulation at 10.3 RPM, count of load change occurrences (count is maintained during shutdown), test parameters maintained during shutdown; monitor the 10.4 preset maximum displacement limit of the loading arm, input/display the following parameters: moment set value/moment actual value. 10.5 Limit values for the initial offset, instantaneous offset, and offset increment of the force arm (as shutdown specifications), test speed. 10.6 Equipped with safety protection features and facilities; testing is not allowed when the safety door is open; features a safety alarm during testing; can set the number of revolutions, and the machine will automatically shut down upon reaching the specified revolution count. 10.7 Equipped with a strong electric control box for driving and controlling the motor.
10.8 Microcomputer Control Unit, equipped with industrial control computers, featuring an integrated A/D conversion card with built-in signal amplification to complete sensor signal amplification and analog-to-digital conversion. 10.9 Computer software is a WINDOWS platform program, offering dynamic display, storage, and output of test reports. 10.10 All other electrical components are sourced from internationally renowned import brands.
