100-300KN tensile testing machine
One.100-300KN Metal Tensile Testing MachineProduct
The JZL-D series 100-300KN metal tensile testing machine is suitable for testing the mechanical properties of rubber materials, including tensile, compression, bending, shearing, tearing, and peeling. It also allows for automatic controlled tests of constant-speed loading, constant-speed deformation, and constant-speed displacement, and features low-cycle load, deformation, and displacement cycles. It measures elongation, tensile strength, bending modulus, elastic modulus, yield strength, net energy, return energy, and total energy, etc. Optional expansion devices include high and low-temperature test chambers, high-temperature furnaces, etc.
Utilize PC for data processing and analysis, with test results automatically saved. After the test, the test curve can be retrieved for review, enabling the reenactment of the test process through curve traversal, or for curve comparison and magnification. The test software under Windows and VisIt platforms boasts robust data and graphics processing capabilities, allowing for immediate printing of comprehensive test reports and curves.
Standard Implementation
GB/T16491-1996 Electronic Testing Machine
This unit can handle various types of curves.
Load vs. Displacement | Load vs. Time
Displacement vs. Time | Stress vs. Strain | Load vs. Two-Point Extension
Sec. II.3000N metal tensile testing machineTechnical Specifications
A. Load Capacity: 100-300 KN
B. Force Resolution: 1/300,000
C. Force Degree: ≤0.5%
D. Magnification Ratio: 7-stage Automatic Switching
E. Displacement Resolution: 1/100,000
F. Displacement: ≤1%
G. Metal extensometer resolution: 1/1000
Metal elongation: ≤0.5%
I. Large Deformation Extensometer: ±1mm
Speed Range: 0.001 - 160 mm/min
Walking space: 900mm (holder and special test space can also be customized according to customer requirements).
L. Test Width: 480mm (Special test widths can also be customized according to customer requirements).
M. Power supply: ∮380V 50Hz.
Power: Approximately 5.5KW
O. Machine dimensions: approx. 1090×840×2100 mm (Length x Width x Height).
Machine Weight: Approximately 1400 kg.
III.100-300KN Metal Tensile Testing MachineDetailed specifications
A. High-precision U.S. Force Transfer Sensor: 100-300KN. Force accuracy within ±0.5%.
B. Capacity Segments: Full Range of 7 Steps: ×1, ×2, ×5, ×10, ×20, ×50, ×100
Utilizing high-precision 24-bit A/D conversion, sampling frequency of 200Hz, full-range force resolution of 1/1,000,000.
C. 动力系统: 日本松下伺服电机+松下伺服器＋上海减速机＋中国台湾滚石滚珠丝杆＋光杆直线轴承
American Torque Sensors
D. Control System: Utilizes Pulse Command control method for faster control, with a control range of 0.001 to 1000 mm/min.
The Zhonglian board features quick coarse adjustment and slow fine adjustment. After testing, it automatically returns to the original point and stores the data.
E. Data Transmission Method: RS232 Transmission
F. Display Method: UTM107 + WIN-XP Test Software Computer Screen Display.
G. Compact single-speed and precise seven-speed linear dual-correcting system.
H. Luxury test interface software allows for setting speed, displacement, load (with adjustable hold time), load increase rate, and stress increase rate.
Adaptive control modes such as rate of change control, combined with multi-stage control, can meet various testing requirements.
I. Test Space: Approximately 350mm (standard specification) for beam width, 950mm for panel travel space (without fixture) (standard specification)
J. Full Range Displacement: Encoder 2500 P/R, 4x enhanced resolution. Utilizes LINE DRIVE encoder with extremely strong anti-interference capability.
Displacement resolution: 0.00001mm. Small deformation: Metal extensometer, resolution 0.001mm (optional)
K. Safety Devices: Overload emergency shutdown, up/down travel limit devices, leakage automatic power-off system, automatic breakpoint shutdown function.
Manual control method: Can be equipped with a wireless remote control device or a manual operation box.
Section 4: 300KN Metal Tensile Testing Machine Computer Configuration System
19-inch LCD Flat Panel Monitor, Intel Core Dual-Core 1.6GHz
Hard drive: 160GB, Memory: 1GB
One HP color inkjet printer
5. 300KN Metal Tensile Testing Machine Software Introduction
A. Modular Test Standard Function: Offers users the ability to set required test standards for application, covering GB, ASTM, DIN, JIS, BS, etc. Test standard specifications.
B. Sample Data: Provides all sample data for user settings, allowing for one-time data entry and reuse. Additionally, users can customize formulas to enhance the relevance of test data.
C. Dual Report Editing: Open-ended user editing of reports, allowing testers to choose their preferred report format (the test program's new built-in Excel report editing function expands the previous one-report-only structure).
D. All length, force units, and display digits are dynamically interchangeable. Force units include T, Kg, N, KN, g, lb, and deformation units include mm, cm, inch.
E. Auto Scale Graphical Curve, enabling graphical display with scale. Allows for real-time dynamic switching of graphical representations during testing. Features include Load-Displacement, Load-Time, Displacement-Time, Stress-Strain, Load-2 Point Extension Graph, and multi-curve comparison.
Test results can be output in data format compatible with Excel.
G. Test completion supports automatic and manual archiving. Automatic calculation of force, upper and lower yield strength, hysteresis loop method, incremental approach method, non-proportional extension strength, tensile strength, compressive strength, specific elongation strength at any point, specific load extension at any point, elastic modulus, elongation, peel zone values, minimum, average, net energy, return energy, total energy, bending modulus, break point displacement x% load, break point load X% displacement, and more. Data Backup: Test data can be saved on any hard disk partition.
H. Randomly switch between multiple languages: Simplified Chinese, Traditional Chinese, English.
I. The software features a historical test data demonstration function.
