Self-hardening sand mold cleaner
Self-hardening sand mold cleaner is used for self-hardening sand resins (furfural resin, alkaline phenolic resin, PUP resin, Bonny resin) in metal molds/The wood mold needs surface cleaning. Due to the release agent (aluminum paste release agent) for self-hardening sand gradually accumulating and becoming more solid after multiple applications, it becomes difficult to remove the residue manually, which is labor-intensive and time-consuming. Forceful physical cleaning not only makes the mold surface rougher but also easily damages the mold, leading to a loss without gain. Therefore, chemical cleaning is the better method.The residue of the curing agent from the mold surface is not removable with this product!
Use Instructions for Cleaning Agents:
1、Pour the cleaner over the mold release residue, ensuring an adequate amount (not less than the amount of residue).
2、Soak the brush thoroughly in the cleaning solution.
3、Brush the brush back and forth over the mold release residue until it dissolves.
4、Clean the mold thoroughly and then reapply the self-hardening sand release agent.
Cleaning Agent Storage, Transportation, and Packaging
Storage:Detergent should be stored in a cool place.,Avoid direct sunlight, high-temperature baking, and moisture ingress. Prevent tilting and damage during transportation.
Packaging: Sealed packaging in iron drums 5Kg 25kg。
Storage period:6Month(s).
































