Grain Removal Sanding Machine for Steel Plates, Push-Type Weld Seam Polishing Machine, Rust Removal and Blasting Machine for Oxide Scale

Handheld sanding belt machineBSH21-75

Motor Power:4.0KW

Spindle Speed:2400 RPM

Belt Sanding Size:2100*75mm 

Volume: Length1000W x 550D x 950H mm

Net Weight:120kg

Suitable for polishing large flat or stainless steel plates

The handcart-type grinding wheel machine is particularly suitable for medium-sized castings with low heights for flat surface grinding or for cutting off the excess sprue and riser stubs. The structure of the handcart-type grinding wheel machine can be homemade in any scale foundry, is easy to use, produces noticeable results, and the outline dimensions can be adjusted according to the casting conditions.。

III. Cautionary Notes ：   

(1) Select the grit size of the abrasive wheel based on the material of the component to be processed and the required processing progress. For softer metals like copper and aluminum, a coarser wheel should be used. For components requiring higher precision, a finer wheel is necessary.

(2) Select the appropriate grinding wheel face based on the shape to be processed.

(3) The abrasive wheel used must not have cracks, defects, or any kind of damage or impairment, and must be properly installed.   To be sturdy. This should be constantly monitored during use. If any cracks, chips, or other defects or damages are found on the grinding wheel, stop using it immediately and replace it with a new one.;At the time of the event, the machine should be immediately stopped and secured.